We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black square cooling fan 25 by 6 mm 5 volt 0.6 watt two wire

OEM Industries

OEM Industries KD0502PEB2-8 25x6 mm 5 V 0.6 W 2-wire fan

SKU CH-ZEKJ-FE2AG

A 25 × 6 mm square cooling fan with ball bearing, 5 V 0.6 W power and a 2-wire 3-pin connector

  • ColorBlack
  • TypeFan only
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • Compact 25 × 6 mm footprint fits tight spaces
  • Ball bearing ensures long-lasting, quiet operation
  • Low 5 V / 0.6 W draw keeps power use minimal
  • Simple 2-wire design eases installation
  • No LED lighting for distraction-free builds

Compact 25 mm square fan

The OEM Industries KD0502PEB2-8 is a 25 by 6 mm square cooling fan that runs on 5 V and draws 0.6 W. It uses a two-wire connection and a ball bearing for smooth rotation. The black frame suits tight spaces in small form-factor builds or embedded boards.

Steady low-power airflow

At its rated voltage the fan delivers continuous airflow without the current spikes seen in higher-wattage models. The ball bearing maintains consistent speed during long operating periods. Low power draw keeps heat contribution minimal inside sealed enclosures.

Two-wire 5 V power requirement

This unit needs a 5 V source that can supply 0.6 W through a two-pin header. Builders using three-pin or four-pin fan headers must adapt the connector. Systems without a 5 V fan header cannot power the fan directly.

Highlights

  • Compact 25 × 6 mm footprint fits tight spaces
  • Ball bearing ensures long-lasting, quiet operation
  • Low 5 V / 0.6 W draw keeps power use minimal
  • Simple 2-wire design eases installation
  • No LED lighting for distraction-free builds

Specifications

ModelKD0502PEB2-8
ColorBlack
TypeFan only
Bearing TypeBall
Power Connector3 Pin
LEDNo

Questions about this item

How much heat and power does the 5 V 0.6 W KD0502PEB2-8 fan add when running continuously?

The fan is rated at 0.6 W on a 5 V supply, so its continuous power draw and heat output are very low.

What connector and voltage must my board or controller provide for the 2-wire KD0502PEB2-8?

It needs a 5 V source and uses a 2-pin lead; the listing also notes a 3-pin connector, so check which header your board exposes.

Will the 25 mm square KD0502PEB2-8 fit the mounting holes on my legacy 25 mm fan bracket?

Yes — the frame is 25 mm on a side, matching the standard 25 mm square footprint used on many older brackets.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.