Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black square 60x38mm 12V 18W 4-wire axial fan

OEM Industries

OEM Industries PSD1206PMBX-A 60x38mm 12V 18W 4-Wire Fan

SKU CH-PT6E-ZS3AY

A 60×38 mm 12 V 18 W four-wire PWM axial fan with ball bearing for HP DL180 G6 2U server CPU modules

  • ColorBlack
  • TypeFan only
  • Fan Size60mm
  • Bearing TypeBall
  • LEDNo
  • Ball bearing ensures long service life
  • 60 mm by 38 mm frame fits HP DL180 G6 2U module
  • 12 V 18 W power draw supports high airflow
  • 4-wire PWM enables precise speed control
  • SUNON PSD1206PMBX-A model matches part numbers 5199199-001 and 530748-001

60 × 38 mm PWM server fan

This 60 mm square axial fan runs on 12 V and draws 18 W through a four-wire PWM connector. It uses a ball bearing for continuous operation in rack environments. The unit is built for HP DL180 G6 Assy 2U modules with part numbers 5199199-001 and 530748-001. It suits administrators replacing a failed cooler in those specific server trays.

Four-wire PWM control limit

The 4-wire PWM interface allows the motherboard to vary speed precisely, but the fan will only respond to a standard PWM duty-cycle signal. If the host board supplies a fixed 12 V without PWM control, the fan runs at full speed continuously. No voltage-control or three-pin fallback mode is specified. The 18 W power draw also requires the header to deliver sufficient current.

Verify 60 mm mounting and HP part match

Confirm the chassis accepts a 60 × 38 mm frame and that the four mounting holes align with the DL180 G6 Assy 2U module. Check that the system uses part 5199199-001 or 530748-001 so the connector and pinout match. Ensure the motherboard provides a 4-pin PWM header rated for the 18 W load. This fan is not a universal drop-in for other 60 mm coolers.

Puncte forte

  • Ball bearing ensures long service life
  • 60 mm by 38 mm frame fits HP DL180 G6 2U module
  • 12 V 18 W power draw supports high airflow
  • 4-wire PWM enables precise speed control
  • SUNON PSD1206PMBX-A model matches part numbers 5199199-001 and 530748-001

Specificații

ModelPSD1206PMBX-A
ColorBlack
TypeFan only
Fan Size60mm
Bearing TypeBall
LEDNo

Întrebări despre acest articol

Which capacity or version of this 60×38 mm fan should I choose for the HP DL180 G6 2U module?

The PSD1206PMBX-A is a single 12 V, 18 W, 4-wire PWM model built for the HP DL180 G6 Assy 2U module; no alternative versions or capacities are offered for this part.

What does the 18 W rating mean once the fan is installed in the server?

At 12 V the fan can draw up to 18 W, giving the high airflow needed for the DL180 G6 2U CPU cooler while the 4-wire PWM connection lets the system vary speed to match thermal load.

How does the 4-wire PWM interface affect speed control in practice?

The 4-wire PWM connector allows the server's fan controller to modulate the fan speed precisely, so the PSD1206PMBX-A runs only as fast as the CPU temperature demands.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.