We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black square 60x38mm 12V 18W 4-wire axial fan

OEM Industries

OEM Industries PSD1206PMBX-A 60x38mm 12V 18W 4-Wire Fan

SKU CH-PT6E-ZS3AY

A 60×38 mm 12 V 18 W four-wire PWM axial fan with ball bearing for HP DL180 G6 2U server CPU modules

  • ColorBlack
  • TypeFan only
  • Fan Size60mm
  • Bearing TypeBall
  • LEDNo
  • Ball bearing ensures long service life
  • 60 mm by 38 mm frame fits HP DL180 G6 2U module
  • 12 V 18 W power draw supports high airflow
  • 4-wire PWM enables precise speed control
  • SUNON PSD1206PMBX-A model matches part numbers 5199199-001 and 530748-001

60 × 38 mm PWM server fan

This 60 mm square axial fan runs on 12 V and draws 18 W through a four-wire PWM connector. It uses a ball bearing for continuous operation in rack environments. The unit is built for HP DL180 G6 Assy 2U modules with part numbers 5199199-001 and 530748-001. It suits administrators replacing a failed cooler in those specific server trays.

Four-wire PWM control limit

The 4-wire PWM interface allows the motherboard to vary speed precisely, but the fan will only respond to a standard PWM duty-cycle signal. If the host board supplies a fixed 12 V without PWM control, the fan runs at full speed continuously. No voltage-control or three-pin fallback mode is specified. The 18 W power draw also requires the header to deliver sufficient current.

Verify 60 mm mounting and HP part match

Confirm the chassis accepts a 60 × 38 mm frame and that the four mounting holes align with the DL180 G6 Assy 2U module. Check that the system uses part 5199199-001 or 530748-001 so the connector and pinout match. Ensure the motherboard provides a 4-pin PWM header rated for the 18 W load. This fan is not a universal drop-in for other 60 mm coolers.

Highlights

  • Ball bearing ensures long service life
  • 60 mm by 38 mm frame fits HP DL180 G6 2U module
  • 12 V 18 W power draw supports high airflow
  • 4-wire PWM enables precise speed control
  • SUNON PSD1206PMBX-A model matches part numbers 5199199-001 and 530748-001

Specifications

ModelPSD1206PMBX-A
ColorBlack
TypeFan only
Fan Size60mm
Bearing TypeBall
LEDNo

Questions about this item

Which capacity or version of this 60×38 mm fan should I choose for the HP DL180 G6 2U module?

The PSD1206PMBX-A is a single 12 V, 18 W, 4-wire PWM model built for the HP DL180 G6 Assy 2U module; no alternative versions or capacities are offered for this part.

What does the 18 W rating mean once the fan is installed in the server?

At 12 V the fan can draw up to 18 W, giving the high airflow needed for the DL180 G6 2U CPU cooler while the 4-wire PWM connection lets the system vary speed to match thermal load.

How does the 4-wire PWM interface affect speed control in practice?

The 4-wire PWM connector allows the server's fan controller to modulate the fan speed precisely, so the PSD1206PMBX-A runs only as fast as the CPU temperature demands.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.