Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black square 60mm CPU fan with 38mm depth, 3-wire connector

OEM Industries

OEM Industries SUNON 6038 PMD1206PMB1-A 12V 10.6W 3-Wire CPU cooler

SKU CH-PF26-YGQJ5

A 60 mm square fan with dual ball bearings and a 3-pin connector draws 10.6 W at 12 V

  • ColorBlack
  • TypeFan only
  • Fan Size60mm
  • Bearing Type2 Ball
  • Power Connector3 Pin
  • LEDNo
  • 60 mm square frame fits tight spaces
  • dual ball bearing extends operating life
  • 12 V 10.6 W power draw for efficient cooling
  • 3-pin connector enables speed monitoring
  • 6038 form factor matches standard mounting holes

Compact 60mm square cooler

The OEM Industries SUNON 6038 PMD1206PMB1-A is a 60 by 38 millimetre fan-only cooler designed for small-form-factor systems or replacement of original-equipment units. It suits builders who need a direct 12 volt drop-in with a three-pin power connector and no integrated lighting.

Dual-ball bearing for continuous duty

The 2 ball bearing assembly is rated for sustained operation at 12 volts and 10.6 watts, resisting wear better than sleeve alternatives when the fan runs constantly. Steady airflow is maintained under load without the speed decay that can occur in shorter-life bearings.

Verify mounting holes and header type

Confirm that your board or chassis provides the 60mm square mounting pattern and a three-pin fan header before ordering. This unit lacks a four-pin PWM lead and RGB lighting, so systems requiring automatic speed curves or illuminated fans will need a different solution.

Puncte forte

  • 60 mm square frame fits tight spaces
  • dual ball bearing extends operating life
  • 12 V 10.6 W power draw for efficient cooling
  • 3-pin connector enables speed monitoring
  • 6038 form factor matches standard mounting holes

Specificații

ModelPMD1206PMB1-A
ColorBlack
TypeFan only
Fan Size60mm
Bearing Type2 Ball
Power Connector3 Pin
LEDNo

Întrebări despre acest articol

How much power does the 12 V 10.6 W SUNON 6038 fan draw when it runs continuously?

The fan is rated at 10.6 W at 12 V, so that is the steady-state power draw during all-day operation.

What motherboard header is required for the 3-pin power connector on this PMD1206PMB1-A cooler?

A standard 3-pin fan header on the motherboard or a compatible fan controller is needed to power and monitor the cooler.

Will the 60 mm square frame fit the mounting holes on my older 60 mm CPU cooler bracket?

The cooler uses a 60 mm square frame; if your existing bracket matches the 60 mm mounting pattern it will fit.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.