Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black 80mm NIDEC cooling fan with 3-pin connector

OEM Industries

OEM Industries T80T12MUB7-52 80mm CPU cooler

SKU CH-HRWE-9WYBT MPN T80T12MUB7-52

An 80 mm ball-bearing fan with a 3-pin connector runs at 12 V and 0.19 A for compact CPU cooling

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • Ball bearing for reliable long-term operation
  • 12 V 0.19 A draws minimal system power
  • 80 mm fan fits compact CPU cooler builds
  • 3-pin connector enables direct motherboard control
  • Nidec 8025 motor delivers consistent airflow

NIDEC 80mm cooling fan

The NIDEC T80T12MUB7-52 is an 80mm axial fan built for targeted airflow in compact chassis or as a replacement unit on compatible heatsinks. It runs on 12V power and draws 0.19A through a standard three-pin connector. The black frame and blades suit low-profile builds where space is limited. Ball-bearing construction supports continuous operation in desktop or industrial environments.

Check power header and mounting holes

Verify that your motherboard or controller provides a three-pin 12V header rated for at least 0.19A before ordering. Confirm the mounting pattern matches an 8025 footprint with 80mm hole spacing. Ensure physical clearance around the frame so cables or adjacent components do not obstruct blade rotation. The fan has no integrated LED lighting if visual indication is required.

Fan-only unit without brackets or speed control

The package contains the fan alone; no mounting screws, vibration pads or adapter cables are included. Absence of a fourth PWM wire means speed is regulated by voltage only, not by pulse-width modulation. No software utilities or firmware are bundled for monitoring or curve configuration. Buyers who need a complete cooler assembly with heatsink, clips or PWM control should look elsewhere.

Puncte forte

  • Ball bearing for reliable long-term operation
  • 12 V 0.19 A draws minimal system power
  • 80 mm fan fits compact CPU cooler builds
  • 3-pin connector enables direct motherboard control
  • Nidec 8025 motor delivers consistent airflow

Specificații

ModelT80T12MUB7-52
ColorBlack
TypeFan only
Fan Size80mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

Întrebări despre acest articol

Does the OEM Industries T80T12MUB7-52 include a heatsink or mounting hardware, or is it only the fan?

The product is listed as fan only, so the package contains the 80 mm ball-bearing fan with a 3-pin power connector and no LED. A heatsink and mounting kit must be sourced separately.

What do the 12 V and 0.19 A ratings on the NIDEC 8025 T80T12MUB7-52 tell me about which version to pick?

Those figures define the electrical version: a 12 V, 0.19 A ball-bearing fan. Choose this model when your cooler or chassis fan header supplies 12 V and you need the airflow profile tied to the 8025 frame size.

How does the 80 mm frame and 3-pin connector affect performance once the T80T12MUB7-52 is installed in a real system?

The 80 mm frame fits coolers and cases designed for that footprint, while the 3-pin connector allows voltage-based speed control from a standard motherboard header, letting the fan spin at its rated 12 V / 0.19 A when full voltage is applied.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.