Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Black 80mm NIDEC cooling fan with 3-pin connector

OEM Industries

OEM Industries T80T12MUB7-52 80mm CPU cooler

SKU CH-HRWE-9WYBT MPN T80T12MUB7-52

An 80 mm ball-bearing fan with a 3-pin connector runs at 12 V and 0.19 A for compact CPU cooling

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • Ball bearing for reliable long-term operation
  • 12 V 0.19 A draws minimal system power
  • 80 mm fan fits compact CPU cooler builds
  • 3-pin connector enables direct motherboard control
  • Nidec 8025 motor delivers consistent airflow

NIDEC 80mm cooling fan

The NIDEC T80T12MUB7-52 is an 80mm axial fan built for targeted airflow in compact chassis or as a replacement unit on compatible heatsinks. It runs on 12V power and draws 0.19A through a standard three-pin connector. The black frame and blades suit low-profile builds where space is limited. Ball-bearing construction supports continuous operation in desktop or industrial environments.

Check power header and mounting holes

Verify that your motherboard or controller provides a three-pin 12V header rated for at least 0.19A before ordering. Confirm the mounting pattern matches an 8025 footprint with 80mm hole spacing. Ensure physical clearance around the frame so cables or adjacent components do not obstruct blade rotation. The fan has no integrated LED lighting if visual indication is required.

Fan-only unit without brackets or speed control

The package contains the fan alone; no mounting screws, vibration pads or adapter cables are included. Absence of a fourth PWM wire means speed is regulated by voltage only, not by pulse-width modulation. No software utilities or firmware are bundled for monitoring or curve configuration. Buyers who need a complete cooler assembly with heatsink, clips or PWM control should look elsewhere.

Najważniejsze cechy

  • Ball bearing for reliable long-term operation
  • 12 V 0.19 A draws minimal system power
  • 80 mm fan fits compact CPU cooler builds
  • 3-pin connector enables direct motherboard control
  • Nidec 8025 motor delivers consistent airflow

Specyfikacja

ModelT80T12MUB7-52
ColorBlack
TypeFan only
Fan Size80mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

Pytania dotyczące tego produktu

Does the OEM Industries T80T12MUB7-52 include a heatsink or mounting hardware, or is it only the fan?

The product is listed as fan only, so the package contains the 80 mm ball-bearing fan with a 3-pin power connector and no LED. A heatsink and mounting kit must be sourced separately.

What do the 12 V and 0.19 A ratings on the NIDEC 8025 T80T12MUB7-52 tell me about which version to pick?

Those figures define the electrical version: a 12 V, 0.19 A ball-bearing fan. Choose this model when your cooler or chassis fan header supplies 12 V and you need the airflow profile tied to the 8025 frame size.

How does the 80 mm frame and 3-pin connector affect performance once the T80T12MUB7-52 is installed in a real system?

The 80 mm frame fits coolers and cases designed for that footprint, while the 3-pin connector allows voltage-based speed control from a standard motherboard header, letting the fan spin at its rated 12 V / 0.19 A when full voltage is applied.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.