Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green rectangular circuit board with gold edge contacts and black memory chips on both sides

OWC

OWC 16GB DDR4 2133MHz CL15 1.2V 260pin SODIMM for HP Z1 G3

SKU CH-5E43-PQM4J

16 GB DDR4 SODIMM at 2133 MHz CL15, 1.2 V, built for the HP Z1 Workstation G3

  • Capacity16GB
  • Type260-Pin DDR4 Non-ECC SODIMM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.2V
  • ECCNo
  • 16GB capacity expands multitasking headroom for the HP Z1 G3
  • DDR4 2133MHz CL15 timing delivers responsive system performance
  • 2V low-voltage operation reduces power draw and heat
  • 260-pin SODIMM form factor fits the workstation slot directly
  • JEDEC and RoHS compliant for a warranty-safe upgrade

Compatible 16 GB DDR4 SODIMM for HP Z1 G3

This 16 GB DDR4 2133 MHz CL15 SODIMM is built specifically for the HP Z1 Workstation G3. It runs at 1.2 V as an unbuffered non-ECC module with a 2Rx8 rank layout and no heat spreader. The part number is 2S1D42R816GB and it meets JEDEC PC4-17000 specifications.

Check your HP Z1 G3 memory slots before ordering

The system uses 260-pin DDR4 SODIMM slots and requires non-ECC unbuffered memory at 1.2 V. Verify how many slots are free and whether the board can address a 2Rx8 16 GB module. The upgrade is a straightforward DIY install but only fits the G3 workstation model.

Steady throughput under continuous workloads

Rated at DDR4 2133 with CL15 latency, the module maintains its JEDEC timings during extended sessions. Without a heat spreader it relies on case airflow, so sustained multitasking or large-file work stays stable as long as the chassis cooling is adequate. The 2Rx8 organisation helps keep bandwidth consistent over time.

Puncte forte

  • 16GB capacity expands multitasking headroom for the HP Z1 G3
  • DDR4 2133MHz CL15 timing delivers responsive system performance
  • 2V low-voltage operation reduces power draw and heat
  • 260-pin SODIMM form factor fits the workstation slot directly
  • JEDEC and RoHS compliant for a warranty-safe upgrade

Specificații

BrandOWC
Part Number2S1D42R816GB
Capacity16GB
Type260-Pin DDR4 Non-ECC SODIMM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP Z1 Workstation G3

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Does the module come as a single 16 GB stick or do I need to buy a second one for dual-channel?

This is a single 16 GB SODIMM. Adding a second identical module will enable dual-channel operation on the Z1 G3.

Is the CL15 2133 MHz variant the only one qualified for the Z1 G3?

The 2133 MHz CL15 1.2 V specification matches the HP Z1 Workstation G3 memory requirement.

What does the 2133 MHz rating actually deliver inside the Z1 G3?

The module runs at 2133 MT/s with CL15 latency at 1.2 V, providing the standard DDR4 bandwidth the workstation expects.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.