暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular circuit board with gold edge contacts and black memory chips on both sides

OWC

OWC 16GB DDR4 2133MHz CL15 1.2V 260pin SODIMM for HP Z1 G3

SKU CH-5E43-PQM4J

16 GB DDR4 SODIMM at 2133 MHz CL15, 1.2 V, built for the HP Z1 Workstation G3

  • Capacity16GB
  • Type260-Pin DDR4 Non-ECC SODIMM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.2V
  • ECCNo
  • 16GB capacity expands multitasking headroom for the HP Z1 G3
  • DDR4 2133MHz CL15 timing delivers responsive system performance
  • 2V low-voltage operation reduces power draw and heat
  • 260-pin SODIMM form factor fits the workstation slot directly
  • JEDEC and RoHS compliant for a warranty-safe upgrade

Compatible 16 GB DDR4 SODIMM for HP Z1 G3

This 16 GB DDR4 2133 MHz CL15 SODIMM is built specifically for the HP Z1 Workstation G3. It runs at 1.2 V as an unbuffered non-ECC module with a 2Rx8 rank layout and no heat spreader. The part number is 2S1D42R816GB and it meets JEDEC PC4-17000 specifications.

Check your HP Z1 G3 memory slots before ordering

The system uses 260-pin DDR4 SODIMM slots and requires non-ECC unbuffered memory at 1.2 V. Verify how many slots are free and whether the board can address a 2Rx8 16 GB module. The upgrade is a straightforward DIY install but only fits the G3 workstation model.

Steady throughput under continuous workloads

Rated at DDR4 2133 with CL15 latency, the module maintains its JEDEC timings during extended sessions. Without a heat spreader it relies on case airflow, so sustained multitasking or large-file work stays stable as long as the chassis cooling is adequate. The 2Rx8 organisation helps keep bandwidth consistent over time.

特長

  • 16GB capacity expands multitasking headroom for the HP Z1 G3
  • DDR4 2133MHz CL15 timing delivers responsive system performance
  • 2V low-voltage operation reduces power draw and heat
  • 260-pin SODIMM form factor fits the workstation slot directly
  • JEDEC and RoHS compliant for a warranty-safe upgrade

仕様

BrandOWC
Part Number2S1D42R816GB
Capacity16GB
Type260-Pin DDR4 Non-ECC SODIMM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP Z1 Workstation G3

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the module come as a single 16 GB stick or do I need to buy a second one for dual-channel?

This is a single 16 GB SODIMM. Adding a second identical module will enable dual-channel operation on the Z1 G3.

Is the CL15 2133 MHz variant the only one qualified for the Z1 G3?

The 2133 MHz CL15 1.2 V specification matches the HP Z1 Workstation G3 memory requirement.

What does the 2133 MHz rating actually deliver inside the Z1 G3?

The module runs at 2133 MT/s with CL15 latency at 1.2 V, providing the standard DDR4 bandwidth the workstation expects.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。