Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Two green 288-pin DDR4 ECC LRDIMM modules in antistatic packaging

OWC

OWC 256GB (2x128GB) DDR4 2933 PC4-23400 CL21 4Rx4 288-pin 1.2V ECC Load Reduced DIMM memory upgrade

SKU CH-Z0H4-83BPS

ECC load-reduced DDR4 kit adds 256 GB across two 128 GB modules at 2933 MHz for HP ProLiant Gen10 servers

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR4 ECC LRDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.2V
  • ECCYes

Capacity 256GB (2 x 128GB)

  • 256 GB total capacity from two 128 GB modules for high-density server workloads
  • ECC load-reduced design maintains data integrity under heavy multi-threaded demands
  • DDR4 2933 speed with CL21 latency delivers responsive throughput for Gen10 platforms
  • 2 V operation reduces power draw across large memory configurations
  • Validated for HP ProLiant DL560, DL580, DX360, DX380 and DX560 Gen10 systems

ECC Load-Reduced DDR4 for HP ProLiant Gen10

This 256 GB kit delivers two 128 GB DDR4 2933 LRDIMMs built for HP ProLiant DL560, DL580, DX360, DX380 and DX560 Gen10 servers. Each module runs at 1.2 V with CL21 latency and 4Rx4 organisation. The load-reduced design reduces electrical load on the memory bus, allowing higher density per channel in enterprise workloads.

Suited for memory-bound server roles.

The modules target virtualisation hosts, large databases and analytics clusters that need maximum capacity per slot. They will not work in standard desktop PCs, consumer workstations or any system that requires unbuffered or registered ECC DIMMs. Mixing with those types is unsupported and will prevent boot.

256 GB total with backward speed headroom

The kit provides 256 GB across two slots, leaving additional DIMM slots free for further expansion on supported platforms. Rated at 2933 MT/s, the memory also runs at 2666, 2400 and 2133 MT/s when paired with slower processors or bus limits. Capacity scales until the platform's maximum supported memory per socket is reached.

Puncte forte

  • 256 GB total capacity from two 128 GB modules for high-density server workloads
  • ECC load-reduced design maintains data integrity under heavy multi-threaded demands
  • DDR4 2933 speed with CL21 latency delivers responsive throughput for Gen10 platforms
  • 2 V operation reduces power draw across large memory configurations
  • Validated for HP ProLiant DL560, DL580, DX360, DX380 and DX560 Gen10 systems

Specificații

BrandOWC
Part Number2L9D44R4256P
Capacity256GB (2 x 128GB)
Type288-Pin DDR4 ECC LRDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.2V
ECCYes
Buffered/RegisteredLoad Reduced
Rank4Rx4
Heat SpreaderNo
Compatible SystemHP ProLiant DL560 Gen10
HP ProLiant DL580 Gen10
HP ProLiant DX360 Gen10
HP ProLiant DX380 Gen10
HP ProLiant DX560 Gen10

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Which server models must I already own for this OWC 256GB DDR4 2933 ECC Load Reduced kit to work?

This kit is validated for HP ProLiant DL560 Gen10, DL580 Gen10, DX360 Gen10, DX380 Gen10 and DX560 Gen10 servers.

Can I keep my existing 2133MHz, 2400MHz or 2666MHz DDR4 ECC Load Reduced modules and add these 2933MHz sticks?

Yes, the modules are backward compatible with 2133MHz, 2400MHz and 2666MHz speeds, but all slots must use ECC Load Reduced DIMMs; mixing with unbuffered or registered ECC is not supported.

How can I verify the 2x128GB kit is running at the correct 2933MHz CL21 1.2V settings after installation?

Check the server BIOS or iLO interface — it should report each DIMM as 128GB, 4Rx4, DDR4-2933, CL21, 1.2V ECC Load Reduced.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.