Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green circuit board with gold contacts and black memory chips

OWC

OWC 2GB DDR3 1600 CL11 204-pin SODIMM memory upgrade

SKU CH-NSBW-RD540

A 2 GB DDR3 1600 MHz SODIMM module for Synology RackStation RS2212+, RS2212RP+, RS2414+ and RS2414RP+ NAS units

  • Capacity2GB
  • Type204-Pin DDR3 Non-ECC SODIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCNo
  • 2GB capacity expands NAS memory for heavier workloads
  • DDR3 1600 speed matches system bus for stable operation
  • CL11 latency and 1.5V voltage meet JEDEC specs
  • 204-pin SODIMM form factor fits Synology RS2212+ and RS2414+ series
  • Single-rank 1Rx8 unbuffered design ensures warranty-safe upgrade

2GB DDR3 SODIMM for Synology NAS

This module is a 2GB DDR3 1600 CL11 204-pin SODIMM built to JEDEC standard. It operates at 1.5V without ECC or registered buffering and uses a 1Rx8 organisation. The stick is validated for Synology RackStation RS2212+, RS2212RP+, RS2414+ and RS2414RP+ systems.

Suitable for capacity expansion on listed

Owners of the four named Synology NAS models who need a single 2GB upgrade can install this part. Builders working with any other platform, or who require ECC protection, registered modules, a different voltage or a larger capacity per slot, should look elsewhere.

DDR3 1600 CL11 1.5V 204-pin SODIMM spec

The memory runs at PC3-12800 speed with CL11 latency at 1.5V in the 204-pin SO-DIMM form factor. Matching these exact parameters is the deciding factor for compatibility with the target Synology units.

Puncte forte

  • 2GB capacity expands NAS memory for heavier workloads
  • DDR3 1600 speed matches system bus for stable operation
  • CL11 latency and 1.5V voltage meet JEDEC specs
  • 204-pin SODIMM form factor fits Synology RS2212+ and RS2414+ series
  • Single-rank 1Rx8 unbuffered design ensures warranty-safe upgrade

Specificații

BrandOWC
Part Number1S6D31R802GB
Capacity2GB
Type204-Pin DDR3 Non-ECC SODIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemSynology NAS RS2212+
Synology NAS RS2212RP+
Synology NAS RS2414+
Synology NAS RS2414RP+

Întrebări despre acest articol

Does the 1.5V DDR3 1600 module run hot or draw extra power in a Synology RS2212+ that operates 24/7?

The module uses standard 1.5V DDR3 at 1600MHz with no heat spreader; power draw is typical for a 2GB unbuffered SODIMM and it adds negligible heat inside the NAS chassis.

What must already be present in the RS2414RP+ for this 204-pin SODIMM to work?

An available DDR3 SODIMM slot that accepts 204-pin PC3-12800 CL11 memory; the board must support non-ECC unbuffered modules at 1.5V.

Will this 2GB stick work alongside the original Synology RAM1600DDR3-2G modules already installed in my RS2212RP+?

Yes, it matches the same DDR3 1600 CL11 1.5V non-ECC specification, so it can run in the same channel with the factory modules.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.