Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Green circuit board with gold contacts and black memory chips

OWC

OWC 2GB DDR3 1600 CL11 204-pin SODIMM memory upgrade

SKU CH-NSBW-RD540

A 2 GB DDR3 1600 MHz SODIMM module for Synology RackStation RS2212+, RS2212RP+, RS2414+ and RS2414RP+ NAS units

  • Capacity2GB
  • Type204-Pin DDR3 Non-ECC SODIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCNo
  • 2GB capacity expands NAS memory for heavier workloads
  • DDR3 1600 speed matches system bus for stable operation
  • CL11 latency and 1.5V voltage meet JEDEC specs
  • 204-pin SODIMM form factor fits Synology RS2212+ and RS2414+ series
  • Single-rank 1Rx8 unbuffered design ensures warranty-safe upgrade

2GB DDR3 SODIMM for Synology NAS

This module is a 2GB DDR3 1600 CL11 204-pin SODIMM built to JEDEC standard. It operates at 1.5V without ECC or registered buffering and uses a 1Rx8 organisation. The stick is validated for Synology RackStation RS2212+, RS2212RP+, RS2414+ and RS2414RP+ systems.

Suitable for capacity expansion on listed

Owners of the four named Synology NAS models who need a single 2GB upgrade can install this part. Builders working with any other platform, or who require ECC protection, registered modules, a different voltage or a larger capacity per slot, should look elsewhere.

DDR3 1600 CL11 1.5V 204-pin SODIMM spec

The memory runs at PC3-12800 speed with CL11 latency at 1.5V in the 204-pin SO-DIMM form factor. Matching these exact parameters is the deciding factor for compatibility with the target Synology units.

Poudarki

  • 2GB capacity expands NAS memory for heavier workloads
  • DDR3 1600 speed matches system bus for stable operation
  • CL11 latency and 1.5V voltage meet JEDEC specs
  • 204-pin SODIMM form factor fits Synology RS2212+ and RS2414+ series
  • Single-rank 1Rx8 unbuffered design ensures warranty-safe upgrade

Specifikacije

BrandOWC
Part Number1S6D31R802GB
Capacity2GB
Type204-Pin DDR3 Non-ECC SODIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemSynology NAS RS2212+
Synology NAS RS2212RP+
Synology NAS RS2414+
Synology NAS RS2414RP+

Vprašanja o tem izdelku

Does the 1.5V DDR3 1600 module run hot or draw extra power in a Synology RS2212+ that operates 24/7?

The module uses standard 1.5V DDR3 at 1600MHz with no heat spreader; power draw is typical for a 2GB unbuffered SODIMM and it adds negligible heat inside the NAS chassis.

What must already be present in the RS2414RP+ for this 204-pin SODIMM to work?

An available DDR3 SODIMM slot that accepts 204-pin PC3-12800 CL11 memory; the board must support non-ECC unbuffered modules at 1.5V.

Will this 2GB stick work alongside the original Synology RAM1600DDR3-2G modules already installed in my RS2212RP+?

Yes, it matches the same DDR3 1600 CL11 1.5V non-ECC specification, so it can run in the same channel with the factory modules.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.