Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Four green DDR3 ECC registered RDIMM modules in anti-static tray

OWC

OWC 32GB (4x8GB) DDR3 1333 ECC Registered RDIMM for HP ProLiant SL165s SL170s SL335s SL390s WS460c

SKU CH-PJPF-RA4B3

A 32 GB DDR3 1333 ECC registered RDIMM kit of four 8 GB modules for HP ProLiant SL165s G7, SL170s G6, SL335s G7, SL390s G7 and WS460c G6 servers

  • Capacity32GB (4 x 8GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 32GB (4 x 8GB)

  • 32 GB total capacity from four 8 GB modules
  • DDR3 1333 PC3-10600 CL9 for server workloads
  • ECC registered design protects data integrity
  • 5 V 2Rx4 240-pin RDIMM fits listed ProLiant models
  • Replaces HP part numbers 500205071 500205171 500206071 500662B21 501536001 593913B21 A0R56A FX622AA FX622UT

HP ProLiant Server Memory Kit

This OWC kit supplies 32GB of DDR3 ECC Registered RDIMM memory across four 8GB modules. It is built for HP ProLiant SL165s G7, SL170s G6, SL335s G7, SL390s G7 and WS460c G6 servers. The modules run at 1333MHz with CL9 latency and 1.5V voltage. This memory will not work in standard desktop computers and cannot be mixed with unbuffered DIMMs.

Thermals and Power at 1.5V

Each module operates at the standard DDR3 1.5V level without a heat spreader. Registered buffering reduces electrical load on the server memory controller during sustained workloads. The 2Rx4 organisation helps maintain signal integrity across all four populated slots. No active cooling is required beyond normal server airflow.

Replaces Nine HP Part Numbers

The kit directly replaces HP part numbers 500205071, 500205171, 500206071, 500662B21, 501536001, 593913B21, A0R56A, FX622AA and FX622UT. OWC tests every module in-house and backs the kit with a limited lifetime warranty and free technical support. Buyers who need unbuffered memory or desktop compatibility should choose a different product.

Puncte forte

  • 32 GB total capacity from four 8 GB modules
  • DDR3 1333 PC3-10600 CL9 for server workloads
  • ECC registered design protects data integrity
  • 5 V 2Rx4 240-pin RDIMM fits listed ProLiant models
  • Replaces HP part numbers 500205071 500205171 500206071 500662B21 501536001 593913B21 A0R56A FX622AA FX622UT

Specificații

BrandOWC
Part Number1R3D32R4032S
Capacity32GB (4 x 8GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemHP ProLiant SL165s G7
HP ProLiant SL170s G6
HP ProLiant SL335s G7
HP ProLiant SL390s G7
HP ProLiant WS460c G6

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

How do I install the 240-pin DDR3 ECC RDIMM modules in the HP ProLiant SL165s G7 and what step is often missed?

Power down the server, open the chassis, align each module's notch with the slot key, press firmly until both retention clips click, then verify in BIOS that all 32GB are recognised; the step often missed is populating slots in the exact channel order shown in the server's service guide.

What maintenance or replacement will the registered ECC RDIMM kit need over its service life?

The modules have no heat spreaders and no moving parts, so no scheduled maintenance is required; replacement is only necessary if a DIMM fails POST or reports correctable ECC errors that exceed the platform's threshold.

What limit appears first when the 1333 MHz CL9 1.5 V registered DIMMs run sustained workloads?

The memory controller's maximum supported bandwidth at DDR3 1333 and the 1.5 V thermal envelope are the first limits; sustained heavy traffic will saturate bus throughput before the modules themselves throttle.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.