Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare

OWC

OWC 4GB DDR3 1333 PC3-10600 CL9 1Rx8 204-pin 1.5V Non-ECC SODIMM memory upgrade

SKU CH-RYDZ-ZMFKG

4GB DDR3 1333 SODIMM upgrade for QNAP TS-470U, TS-670U and TS-1270U-RP NAS systems

  • Capacity4GB
  • Type204-Pin DDR3 Non-ECC SODIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCNo
  • 4GB module expands NAS memory capacity for multitasking
  • DDR3 1333 PC3-10600 CL9 speed matches system requirements
  • 5V low-voltage design reduces power draw and heat
  • 204-pin SODIMM form factor fits listed QNAP models
  • JEDEC and RoHS compliant for warranty-safe upgrade

Targeted QNAP NAS Memory Upgrade

This 4GB DDR3 SODIMM is built for QNAP TS-1270U-RP, TS-470U, TS-470U-RP, TS-470U-SP and TS-670U systems. It suits administrators who need a validated module to expand capacity in these specific rackmount or tower NAS units. Buyers requiring ECC protection or capacities beyond a single 4GB stick should look elsewhere.

DDR3 1333 Interface Constraints

The module runs at PC3-10600 1333MHz with CL9 latency on the DDR3 standard. Speed is fixed by the JEDEC specification; the memory will not negotiate a higher data rate even if the platform supports faster DDR3 grades. Systems limited to lower DDR3 speeds will downclock the module automatically.

Unbuffered SODIMM Build and Fit

A 204-pin unbuffered non-ECC stick without a heat spreader keeps the profile low for tight NAS slots. The 1.5V operation matches the DDR3 baseline, so no voltage adjustment is needed. Installers should confirm the chassis provides SODIMM access before opening the unit.

Puncte forte

  • 4GB module expands NAS memory capacity for multitasking
  • DDR3 1333 PC3-10600 CL9 speed matches system requirements
  • 5V low-voltage design reduces power draw and heat
  • 204-pin SODIMM form factor fits listed QNAP models
  • JEDEC and RoHS compliant for warranty-safe upgrade

Specificații

BrandOWC
Part Number1S3D31R804GB
Capacity4GB
Type204-Pin DDR3 Non-ECC SODIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemQNAP TS-1270U-RP
QNAP TS-470U
QNAP TS-470U-RP
QNAP TS-470U-SP
QNAP TS-670U

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Should I pick the 4GB module or add multiple sticks for my QNAP TS-470U?

The module is a single 4GB stick; add one per available SODIMM slot to reach the capacity your NAS supports.

What does the 1333MHz rating deliver inside a TS-670U?

It runs at DDR3 1333 (PC3-10600) with CL9 latency, giving the rated bandwidth the QNAP memory controller expects.

Will the 204-pin DDR3 SODIMM fit the TS-1270U-RP memory slots?

Yes — the 204-pin DDR3 SODIMM form factor matches the slots used in the listed QNAP models.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.