Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green rectangular DDR3 SODIMM module with gold contacts and black chips on both sides

OWC

OWC 4GB DDR3 1333 PC3-10600 CL9 1Rx8 204-pin 1.5V Non-ECC SODIMM memory upgrade

SKU CH-RYDZ-ZMFKG

4GB DDR3 1333 SODIMM upgrade for QNAP TS-470U, TS-670U and TS-1270U-RP NAS systems

  • Capacity4GB
  • Type204-Pin DDR3 Non-ECC SODIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCNo
  • 4GB module expands NAS memory capacity for multitasking
  • DDR3 1333 PC3-10600 CL9 speed matches system requirements
  • 5V low-voltage design reduces power draw and heat
  • 204-pin SODIMM form factor fits listed QNAP models
  • JEDEC and RoHS compliant for warranty-safe upgrade

Targeted QNAP NAS Memory Upgrade

This 4GB DDR3 SODIMM is built for QNAP TS-1270U-RP, TS-470U, TS-470U-RP, TS-470U-SP and TS-670U systems. It suits administrators who need a validated module to expand capacity in these specific rackmount or tower NAS units. Buyers requiring ECC protection or capacities beyond a single 4GB stick should look elsewhere.

DDR3 1333 Interface Constraints

The module runs at PC3-10600 1333MHz with CL9 latency on the DDR3 standard. Speed is fixed by the JEDEC specification; the memory will not negotiate a higher data rate even if the platform supports faster DDR3 grades. Systems limited to lower DDR3 speeds will downclock the module automatically.

Unbuffered SODIMM Build and Fit

A 204-pin unbuffered non-ECC stick without a heat spreader keeps the profile low for tight NAS slots. The 1.5V operation matches the DDR3 baseline, so no voltage adjustment is needed. Installers should confirm the chassis provides SODIMM access before opening the unit.

Prednosti

  • 4GB module expands NAS memory capacity for multitasking
  • DDR3 1333 PC3-10600 CL9 speed matches system requirements
  • 5V low-voltage design reduces power draw and heat
  • 204-pin SODIMM form factor fits listed QNAP models
  • JEDEC and RoHS compliant for warranty-safe upgrade

Špecifikácie

BrandOWC
Part Number1S3D31R804GB
Capacity4GB
Type204-Pin DDR3 Non-ECC SODIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemQNAP TS-1270U-RP
QNAP TS-470U
QNAP TS-470U-RP
QNAP TS-470U-SP
QNAP TS-670U

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

Should I pick the 4GB module or add multiple sticks for my QNAP TS-470U?

The module is a single 4GB stick; add one per available SODIMM slot to reach the capacity your NAS supports.

What does the 1333MHz rating deliver inside a TS-670U?

It runs at DDR3 1333 (PC3-10600) with CL9 latency, giving the rated bandwidth the QNAP memory controller expects.

Will the 204-pin DDR3 SODIMM fit the TS-1270U-RP memory slots?

Yes — the 204-pin DDR3 SODIMM form factor matches the slots used in the listed QNAP models.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.