Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green circuit board with gold edge contacts, black memory chips, no heat spreader

OWC

OWC 4GB DDR3 1600 CL11 240-pin 1.5V UDIMM memory upgrade HP ProDesk 600 G1

SKU CH-5BWC-3YM7P

4GB DDR3 1600 CL11 UDIMM upgrades HP ProDesk 600 G1 SFF and Tower systems

  • Capacity4GB
  • Type240-Pin DDR3 Non-ECC UDIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCNo
  • Boost PC responsiveness with a 4 GB DDR3 upgrade
  • JEDEC and RoHS compliant for warranty-safe installation
  • CL11 latency at 1600 MHz DDR3 speed
  • Single-rank 1Rx8 unbuffered module fits 240-pin slots
  • Designed for HP ProDesk 600 G1 SFF and Tower

HP ProDesk 600 G1 memory upgrade

This 4 GB DDR3 1600 module is built for HP ProDesk 600 G1 SFF and Tower systems. It adds a single 240-pin UDIMM running at 1.5 V with CL11 timing. The part is JEDEC-standard and non-ECC. Buyers who need ECC, registered DIMMs or a different DDR generation cannot use this module.

Replaces slower or smaller factory DIMMs

Swapping a 2 GB or lower-speed stick for this PC3-12800 part raises total capacity and bandwidth. The jump is worth it when the system feels sluggish with multiple browser tabs or office apps open. If the board already runs at 1600 MHz with matched ranks, the gain will be smaller.

Simple DIY installation

Power off, open the case and press the module into the empty 240-pin slot until the latches click. Common issues include mixing ranks or speeds, forgetting to seat the stick fully, or leaving the PSU switched on. The supplier provides a basic installation video for reference.

Puncte forte

  • Boost PC responsiveness with a 4 GB DDR3 upgrade
  • JEDEC and RoHS compliant for warranty-safe installation
  • CL11 latency at 1600 MHz DDR3 speed
  • Single-rank 1Rx8 unbuffered module fits 240-pin slots
  • Designed for HP ProDesk 600 G1 SFF and Tower

Specificații

BrandOWC
Part Number1U6D31R804GB
Capacity4GB
Type240-Pin DDR3 Non-ECC UDIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemHP ProDesk 600 G1 SFF
HP ProDesk 600 G1 Tower

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Will the 240-pin DDR3 DIMM fit the HP ProDesk 600 G1 SFF or Tower?

Yes, the 240-pin DDR3 UDIMM matches the desktop memory slots in both the HP ProDesk 600 G1 SFF and Tower models.

What is the correct way to seat the 1.5V module so it locks in place?

Align the notch on the module with the slot key, press down firmly until both side clips snap closed — partial insertion is the common mistake.

Does the CL11 1Rx8 stick require any future firmware updates or battery changes?

No, DDR3 UDIMM memory has no firmware, battery or moving parts; it only needs replacement if a module fails or you want more capacity.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.