Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green circuit board with gold edge contacts, black memory chips, no heat spreader

OWC

OWC 4GB DDR3 1600 CL11 240-pin 1.5V UDIMM memory upgrade HP ProDesk 600 G1

SKU CH-5BWC-3YM7P

4GB DDR3 1600 CL11 UDIMM upgrades HP ProDesk 600 G1 SFF and Tower systems

  • Capacity4GB
  • Type240-Pin DDR3 Non-ECC UDIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCNo
  • Boost PC responsiveness with a 4 GB DDR3 upgrade
  • JEDEC and RoHS compliant for warranty-safe installation
  • CL11 latency at 1600 MHz DDR3 speed
  • Single-rank 1Rx8 unbuffered module fits 240-pin slots
  • Designed for HP ProDesk 600 G1 SFF and Tower

HP ProDesk 600 G1 memory upgrade

This 4 GB DDR3 1600 module is built for HP ProDesk 600 G1 SFF and Tower systems. It adds a single 240-pin UDIMM running at 1.5 V with CL11 timing. The part is JEDEC-standard and non-ECC. Buyers who need ECC, registered DIMMs or a different DDR generation cannot use this module.

Replaces slower or smaller factory DIMMs

Swapping a 2 GB or lower-speed stick for this PC3-12800 part raises total capacity and bandwidth. The jump is worth it when the system feels sluggish with multiple browser tabs or office apps open. If the board already runs at 1600 MHz with matched ranks, the gain will be smaller.

Simple DIY installation

Power off, open the case and press the module into the empty 240-pin slot until the latches click. Common issues include mixing ranks or speeds, forgetting to seat the stick fully, or leaving the PSU switched on. The supplier provides a basic installation video for reference.

Prednosti

  • Boost PC responsiveness with a 4 GB DDR3 upgrade
  • JEDEC and RoHS compliant for warranty-safe installation
  • CL11 latency at 1600 MHz DDR3 speed
  • Single-rank 1Rx8 unbuffered module fits 240-pin slots
  • Designed for HP ProDesk 600 G1 SFF and Tower

Špecifikácie

BrandOWC
Part Number1U6D31R804GB
Capacity4GB
Type240-Pin DDR3 Non-ECC UDIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemHP ProDesk 600 G1 SFF
HP ProDesk 600 G1 Tower

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

Will the 240-pin DDR3 DIMM fit the HP ProDesk 600 G1 SFF or Tower?

Yes, the 240-pin DDR3 UDIMM matches the desktop memory slots in both the HP ProDesk 600 G1 SFF and Tower models.

What is the correct way to seat the 1.5V module so it locks in place?

Align the notch on the module with the slot key, press down firmly until both side clips snap closed — partial insertion is the common mistake.

Does the CL11 1Rx8 stick require any future firmware updates or battery changes?

No, DDR3 UDIMM memory has no firmware, battery or moving parts; it only needs replacement if a module fails or you want more capacity.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.