Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black 140mm case fan with DRGB lighting and nine blades

Phanteks

Phanteks MG-F140PDRGB_BK 140mm DRGB case fan

SKU CH-XHR2-V7T35 MPN MG-F140PDRGB_BK

A 140mm DRGB case fan delivering 85 CFM airflow at 1500 RPM with a 29 dBA noise level and rifle bearing for quiet cooling

  • Fan Counts1 Fan
  • Fan ControllerNo Controller
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size140mm
  • Fan Thickness25mm
  • High static-pressure cooling from nine-blade 140 mm design
  • Quiet 29 dBA maximum noise with rifle bearing
  • Precise speed control via 4-pin PWM connector
  • Uniform illumination from twelve integrated D-RGB LEDs
  • Vibration-free mounting using included rubber dampeners

140mm DRGB case fan

The Phanteks MG-F140PDRGB_BK is a 140mm case fan built for system builders who want addressable lighting and PWM speed control in a single unit. It uses a rifle bearing and nine blades to deliver 85 CFM at up to 1500 RPM. The black frame measures 140.00 x 140.00 x 25.00 mm and includes rubber dampeners to reduce vibration. Twelve integrated DRGB LEDs light the blades and support daisy-chain cabling for simpler routing.

Upgrade from fixed-speed or non-RGB fans

This fan replaces basic 3-pin or fixed-speed 120mm units when the chassis supports 140mm mounts and the builder wants per-fan colour control via a 5V DRGB header. The jump is worth it when the case airflow path benefits from the higher 85 CFM rating and the PWM curve can be tuned to keep noise near 29 dBA at typical loads. It is not for builders whose cases only accept 120mm fans or who lack a 5V DRGB header on the motherboard or controller.

Sustained load behaviour

Under continuous operation the rifle bearing maintains the 1500 RPM target with a +/- 10% tolerance while the PWM signal adjusts speed to match thermal demand. The rigid frame and rubber dampeners keep vibration-induced noise stable rather than letting it creep up over time. Airflow remains at the rated 85 CFM as long as the static pressure curve is not exceeded by dense radiator fins or restrictive filters.

Puncte forte

  • High static-pressure cooling from nine-blade 140 mm design
  • Quiet 29 dBA maximum noise with rifle bearing
  • Precise speed control via 4-pin PWM connector
  • Uniform illumination from twelve integrated D-RGB LEDs
  • Vibration-free mounting using included rubber dampeners

Specificații

BrandMetallicGear
SeriesSkiron DRGB
ModelMG-F140PDRGB_BK
Fan Counts1 Fan
Fan ControllerNo Controller
TypeCase Fan
CompatibilityCase
Fan Size140mm
Fan Thickness25mm
Bearing TypeRifle Bearing
RPM1500 RPM +/- 10%
Air Flow85 CFM
Noise Level29 dBA (Max)
Power Connector4 Pin
ColorBlack
LEDDRGB
FeaturesThe new Metallicgear Skiron DRGB Fan is designed to optimized and enhance static pressure for better cooling. The nine blades design is highly efficient in producing optimal air pressure and balanced airflow. The Skiron’s frame geometry helps improve the performance of the fan and the included dampening washers help reduces vibration. The Metallicgear Skiron DRGB fan will include DRGB lighting to customize your build.
Dimensions140.00 x 140.00 x 25.00 mm
Greutate la expediere0.19 kg
Dimensiunile coletului163 × 142 × 25 mm

Întrebări despre acest articol

Will the 140mm by 25mm frame fit my case fan slots?

The fan measures 140mm square and 25mm thick, matching the standard 140mm mounting pattern used by most mid-tower and full-tower cases.

How do I connect the PWM and DRGB cables, and what is the common mistake?

Plug the 4-pin PWM header into a motherboard fan header for speed control, then connect the DRGB cable to a 5V addressable RGB header or daisy-chain it; the frequent error is inserting the DRGB plug into a 12V RGB header.

When should I expect to replace the rifle bearing or clean the nine blades?

The rifle bearing is rated for long life at 1500 RPM; plan to clean dust from the nine blades every 6–12 months and consider replacement only if noise rises above the 29 dBA spec.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.