Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Grey ATX power supply with 80mm fan and built-in cables

Replace Power

Replace Power power supply 420W 280W HP A1310y A1312n A1314n A1319h A1320n A1323w

SKU CH-YMYE-0R6F2

ATX power supply delivers 280 W continuous output with 420 W peak capacity for compatible HP desktops

  • ColorGrey
  • TypeATX
  • Fans1
  • Weight4
  • Fits shallow ATX bays with 5.86 inch depth
  • Delivers 420 watt peak and 280 watt continuous power
  • Runs on 110/220 volt mains from 47 to 63 hertz
  • Supplies +5V, -5V, +12V1, +12V2, +3.3V, -12V, +5V-SB rails
  • Includes 24 pin, 4 pin CPU, three SATA 15 pin and Molex connectors

Replacement PSU for HP A1310y A1312n A1314n A1319h

This unit replaces the original power supply in specific HP desktop models including the A1310y A1312n A1314n A1319h A1320n and A1323w. It uses a standard ATX form factor with reduced depth so it fits the existing chassis without modification. The built-in cabling provides the connectors those systems expect. Grey colour matches the original aesthetic.

ATX connector limits and rail behaviour

The 24-pin motherboard connector splits as 20+4 for backward compatibility. A single 4-pin CPU power lead is provided. Three SATA 15-pin connectors and two Molex 4-pin connectors serve drives and peripherals. One floppy 4-pin lead remains for legacy devices. The unit delivers +5V -5V +12V1 +12V2 +3.3V -12V and +5V-SB rails. AC input accepts 110V or 220V at 47 to 63 Hz.

280 W continuous capacity headroom

Total continuous output is rated at 280 watts with a 420 watt peak figure. Hold-up time is a minimum of 17 ms at nominal input. Rise time stays below 70 ms. The 80 mm fan maintains airflow for stable long-term operation. Systems demanding more than 280 watts sustained will exceed this supply's capability. Builder configurations requiring additional PCIe power leads or higher 12 V current cannot use this unit.

Puncte forte

  • Fits shallow ATX bays with 5.86 inch depth
  • Delivers 420 watt peak and 280 watt continuous power
  • Runs on 110/220 volt mains from 47 to 63 hertz
  • Supplies +5V, -5V, +12V1, +12V2, +3.3V, -12V, +5V-SB rails
  • Includes 24 pin, 4 pin CPU, three SATA 15 pin and Molex connectors

Specificații

BrandReplace Power
ModelHP A1310y CTO A1312n A1314n A1319h A1320n A1323w
ColorGrey
TypeATX
Fans1
Weight4

Întrebări despre acest articol

Which HP models does this replacement power supply fit?

This unit is listed for HP A1310y CTO, A1312n, A1314n, A1319h, A1320n and A1323w desktops.

What does the 280-watt total wattage mean for my system?

The combined output across all rails is rated at 280 watts, so the power supply can deliver that level continuously to motherboard, drives and peripherals.

What connectors come on the fixed cables?

The cables include a 24-pin (20+4) ATX connector, one 4-pin CPU plug, three SATA 15-pin plugs, two Molex 4-pin plugs and one floppy 4-pin plug.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.