Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Grey ATX power supply with 80mm fan and built-in cables

Replace Power

Replace Power power supply 420W 280W HP A1310y A1312n A1314n A1319h A1320n A1323w

SKU CH-YMYE-0R6F2

ATX power supply delivers 280 W continuous output with 420 W peak capacity for compatible HP desktops

  • ColorGrey
  • TypeATX
  • Fans1
  • Weight4
  • Fits shallow ATX bays with 5.86 inch depth
  • Delivers 420 watt peak and 280 watt continuous power
  • Runs on 110/220 volt mains from 47 to 63 hertz
  • Supplies +5V, -5V, +12V1, +12V2, +3.3V, -12V, +5V-SB rails
  • Includes 24 pin, 4 pin CPU, three SATA 15 pin and Molex connectors

Replacement PSU for HP A1310y A1312n A1314n A1319h

This unit replaces the original power supply in specific HP desktop models including the A1310y A1312n A1314n A1319h A1320n and A1323w. It uses a standard ATX form factor with reduced depth so it fits the existing chassis without modification. The built-in cabling provides the connectors those systems expect. Grey colour matches the original aesthetic.

ATX connector limits and rail behaviour

The 24-pin motherboard connector splits as 20+4 for backward compatibility. A single 4-pin CPU power lead is provided. Three SATA 15-pin connectors and two Molex 4-pin connectors serve drives and peripherals. One floppy 4-pin lead remains for legacy devices. The unit delivers +5V -5V +12V1 +12V2 +3.3V -12V and +5V-SB rails. AC input accepts 110V or 220V at 47 to 63 Hz.

280 W continuous capacity headroom

Total continuous output is rated at 280 watts with a 420 watt peak figure. Hold-up time is a minimum of 17 ms at nominal input. Rise time stays below 70 ms. The 80 mm fan maintains airflow for stable long-term operation. Systems demanding more than 280 watts sustained will exceed this supply's capability. Builder configurations requiring additional PCIe power leads or higher 12 V current cannot use this unit.

Poudarki

  • Fits shallow ATX bays with 5.86 inch depth
  • Delivers 420 watt peak and 280 watt continuous power
  • Runs on 110/220 volt mains from 47 to 63 hertz
  • Supplies +5V, -5V, +12V1, +12V2, +3.3V, -12V, +5V-SB rails
  • Includes 24 pin, 4 pin CPU, three SATA 15 pin and Molex connectors

Specifikacije

BrandReplace Power
ModelHP A1310y CTO A1312n A1314n A1319h A1320n A1323w
ColorGrey
TypeATX
Fans1
Weight4

Vprašanja o tem izdelku

Which HP models does this replacement power supply fit?

This unit is listed for HP A1310y CTO, A1312n, A1314n, A1319h, A1320n and A1323w desktops.

What does the 280-watt total wattage mean for my system?

The combined output across all rails is rated at 280 watts, so the power supply can deliver that level continuously to motherboard, drives and peripherals.

What connectors come on the fixed cables?

The cables include a 24-pin (20+4) ATX connector, one 4-pin CPU plug, three SATA 15-pin plugs, two Molex 4-pin plugs and one floppy 4-pin plug.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.