NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.
Replace Power
A 420W ATX power supply with an 80mm fan, switchable 110V and 220V input, and connectors including 20+4 ATX, ATX12V, SATA, peripheral and floppy
This 420W ATX power supply replaces faulty or ageing units in HP desktops and other compatible systems. It delivers the rated wattage through a standard ATX form factor with a single 80mm fan for cooling. The grey chassis fits directly into the same mounting points as the original equipment.
The unit serves as a direct swap for HP part numbers 376649-001 405479-001 405872-001 410507-002 and matches the original 420W rating. The jump is worth it when the existing supply has failed, shows voltage instability or cannot sustain load under normal operation. Input voltage is switchable between 110V and 220V for regional compatibility.
The supply provides one SATA connector, a 20+4 pin ATX connector, a 12V ATX connector, two large peripheral connectors, two short peripheral connectors and one floppy connector. Cable lengths of 14-inch and 15-inch reach typical drive bays and motherboard headers. Builders needing additional SATA devices or multiple 12V CPU connectors should verify requirements before purchase.
| Brand | Replace Power |
|---|---|
| Model | RPSU-C99-8 |
| Color | Grey |
| Type | ATX |
| Fans | 1 |
| Weight | 0.1 |
The unit uses a single 80 mm fan; allow enough depth behind the rear panel for the fan housing and cable bend radius so airflow is not restricted.
The supplied 14-inch ATX lead supports both 20-pin and 24-pin layouts; plug the full 24-pin block into the board and leave the extra four pins unattached if the socket is 20-pin.
Clean the 80 mm fan intake with compressed air every six to twelve months; replace the fan if bearing noise appears or airflow drops noticeably.
Tot din acest raion
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
În ce monedă plătiți și în ce monedă citiți prețurile.
Trimis din portofelul dumneavoastră la finalizarea comenzii
Doar pentru afișare — catalogul este exprimat în dolari
Nicio monedă nu corespunde.
Alegeți limba în care vă vorbește site-ul.
Prima vizită?
Aveți deja un cont?
Nu există o resetare automată: acest magazin nu trimite niciun e-mail, deci nu există niciun link de unică folosință de solicitat. Lăsați adresa în cont. Va fi tratată manual.
Cerere înregistrată
Nu veți primi nimic în căsuța de e-mail — acest magazin nu trimite niciun e-mail. Cineva se ocupă de asta manual.
V-ați amintit-o?