Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Silver 3.5-inch enterprise hard drive in HP Gen8 hot-swap tray

Seagate

Seagate P44757-005 18TB 7200 RPM SATA 6.0Gb/s 256MB 3.5in internal hard drive

SKU CH-5N7Y-VEX99 MPN P44757-005

18 TB 3.5-inch SATA drive with 7200 RPM, 256 MB cache, helium-sealed design and 24/7 enterprise rating

  • Capacity18TB
  • RPM7200 RPM
  • InterfaceSATA 6.0Gb/s
  • Cache256MB
  • Recording TechnologyCMR
  • Form Factor3.5"
  • Massive 18TB capacity stores vast datasets
  • 7200 RPM spindle delivers sustained 270 MB/s throughput
  • 256MB cache accelerates frequent read and write operations
  • Helium-sealed design enables 24/7 enterprise reliability
  • Hot-swap support simplifies maintenance in 3.5in bays

18TB Enterprise SATA Hard Drive

This 18TB Seagate Generation 8 drive uses a SATA 6.0Gb/s interface and spins at 7200 RPM with a 256MB cache. It is built for enterprise NAS, DAS, workstation and data-centre server deployments where continuous operation is required. The helium-sealed design supports 24/7 duty cycles in compatible 3.5-inch bays.

Suited for high-capacity bulk storage in HPE Gen8

Buyers who need a different interface protocol cannot use this drive. Systems that require a 2.5-inch form factor or a non-SATA connection will not accept it. The unit ships in an HP Gen8 tray that fits Gen8 and Gen9 ProLiant servers and listed storage arrays.

SATA 6.0Gb/s interface with 7200 RPM spindle

The single specification that determines fit is the SATA 6.0Gb/s interface combined with a 7200 RPM spindle speed. This defines the host connector, maximum throughput of 270 MB/s and the mechanical envelope for the 3.5-inch bay. Verify that the target system supports this interface and rotational speed before purchase.

Puncte forte

  • Massive 18TB capacity stores vast datasets
  • 7200 RPM spindle delivers sustained 270 MB/s throughput
  • 256MB cache accelerates frequent read and write operations
  • Helium-sealed design enables 24/7 enterprise reliability
  • Hot-swap support simplifies maintenance in 3.5in bays

Specificații

BrandSeagate/HP
SeriesGeneration 8
ModelMB018000GYDKR
Part NumberP44757-005
Capacity18TB
RPM7200 RPM
InterfaceSATA 6.0Gb/s
Cache256MB
Recording TechnologyCMR
Form Factor3.5"
FeaturesEnterprise-Class, 24/7 Rated, Helium-Sealed, Hot-Swap Support

Întrebări despre acest articol

Will the 3.5-inch SATA 6.0Gb/s interface let this 18TB drive work in my older desktop that only has SATA 3Gb/s ports?

Yes, the SATA 6.0Gb/s interface is backward compatible with SATA 3Gb/s ports, so the drive will function at the slower 3Gb/s speed on your older desktop.

How can I verify the 7200 RPM CMR drive is delivering its rated 270 MB/s sustained transfer rate after installation?

Run a sequential read/write benchmark such as CrystalDiskMark or ATTO; sustained results near 270 MB/s confirm the drive is performing to specification.

Does the retail box include the HP Gen8 tray and mounting screws, or must I buy a 3.5-inch carrier separately?

The drive ships installed in an HP Gen8 3.5-inch tray; no additional carrier or screws are required for Gen8 or Gen9 ProLiant bays.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.