We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 3.5-inch enterprise hard drive in HP Gen8 hot-swap tray

Seagate

Seagate P44757-005 18TB 7200 RPM SATA 6.0Gb/s 256MB 3.5in internal hard drive

SKU CH-5N7Y-VEX99 MPN P44757-005

18 TB 3.5-inch SATA drive with 7200 RPM, 256 MB cache, helium-sealed design and 24/7 enterprise rating

  • Capacity18TB
  • RPM7200 RPM
  • InterfaceSATA 6.0Gb/s
  • Cache256MB
  • Recording TechnologyCMR
  • Form Factor3.5"
  • Massive 18TB capacity stores vast datasets
  • 7200 RPM spindle delivers sustained 270 MB/s throughput
  • 256MB cache accelerates frequent read and write operations
  • Helium-sealed design enables 24/7 enterprise reliability
  • Hot-swap support simplifies maintenance in 3.5in bays

18TB Enterprise SATA Hard Drive

This 18TB Seagate Generation 8 drive uses a SATA 6.0Gb/s interface and spins at 7200 RPM with a 256MB cache. It is built for enterprise NAS, DAS, workstation and data-centre server deployments where continuous operation is required. The helium-sealed design supports 24/7 duty cycles in compatible 3.5-inch bays.

Suited for high-capacity bulk storage in HPE Gen8

Buyers who need a different interface protocol cannot use this drive. Systems that require a 2.5-inch form factor or a non-SATA connection will not accept it. The unit ships in an HP Gen8 tray that fits Gen8 and Gen9 ProLiant servers and listed storage arrays.

SATA 6.0Gb/s interface with 7200 RPM spindle

The single specification that determines fit is the SATA 6.0Gb/s interface combined with a 7200 RPM spindle speed. This defines the host connector, maximum throughput of 270 MB/s and the mechanical envelope for the 3.5-inch bay. Verify that the target system supports this interface and rotational speed before purchase.

Highlights

  • Massive 18TB capacity stores vast datasets
  • 7200 RPM spindle delivers sustained 270 MB/s throughput
  • 256MB cache accelerates frequent read and write operations
  • Helium-sealed design enables 24/7 enterprise reliability
  • Hot-swap support simplifies maintenance in 3.5in bays

Specifications

BrandSeagate/HP
SeriesGeneration 8
ModelMB018000GYDKR
Part NumberP44757-005
Capacity18TB
RPM7200 RPM
InterfaceSATA 6.0Gb/s
Cache256MB
Recording TechnologyCMR
Form Factor3.5"
FeaturesEnterprise-Class, 24/7 Rated, Helium-Sealed, Hot-Swap Support

Questions about this item

Will the 3.5-inch SATA 6.0Gb/s interface let this 18TB drive work in my older desktop that only has SATA 3Gb/s ports?

Yes, the SATA 6.0Gb/s interface is backward compatible with SATA 3Gb/s ports, so the drive will function at the slower 3Gb/s speed on your older desktop.

How can I verify the 7200 RPM CMR drive is delivering its rated 270 MB/s sustained transfer rate after installation?

Run a sequential read/write benchmark such as CrystalDiskMark or ATTO; sustained results near 270 MB/s confirm the drive is performing to specification.

Does the retail box include the HP Gen8 tray and mounting screws, or must I buy a 3.5-inch carrier separately?

The drive ships installed in an HP Gen8 3.5-inch tray; no additional carrier or screws are required for Gen8 or Gen9 ProLiant bays.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.