Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Silver 3.5 inch bare hard drive with exposed circuit board

Seagate

Seagate ST380215ACE 80GB 7200 RPM 2MB IDE 3.5" internal hard drive

SKU CH-MP4T-5PDFK MPN ST380215ACE

An 80 GB IDE desktop drive spinning at 7200 RPM with 2 MB cache, supplied as a bare 3.5" unit

  • PackagingBare Drive
  • InterfaceIDE Ultra ATA100 / ATA-6
  • Capacity80GB
  • NAND Flash Memory TypeSLC
  • RPM7200 RPM
  • Cache2MB
  • 7200 RPM spindle speed enables quick data access
  • 2 MB cache buffers bursts for smoother throughput
  • IDE Ultra ATA100 interface fits legacy desktop builds
  • 80 GB capacity stores OS and essential files
  • 5 inch form factor mounts in standard drive bays

80 GB IDE Desktop Drive

This is a refurbished Seagate DB35 Series 7200.3 internal hard drive with an 80 GB capacity. It uses a 3.5 inch form factor and connects via an IDE Ultra ATA100 / ATA-6 interface. The drive spins at 7200 RPM and includes a 2 MB cache. It is intended for desktop systems that require a legacy parallel ATA storage device.

Suits legacy desktops only

This drive suits technicians repairing or maintaining older desktop computers equipped with IDE controllers. It is not for builders assembling modern systems that lack IDE ports, nor for users who need higher capacities or solid-state performance. The bare drive packaging means no cables or mounting hardware are included.

IDE Ultra ATA100 interface decides fit

The single specification that determines compatibility is the IDE Ultra ATA100 / ATA-6 interface. Your motherboard or controller card must provide a matching 40-pin IDE connector and support the ATA-6 protocol. Without that specific legacy interface, this drive cannot be installed or used.

Puncte forte

  • 7200 RPM spindle speed enables quick data access
  • 2 MB cache buffers bursts for smoother throughput
  • IDE Ultra ATA100 interface fits legacy desktop builds
  • 80 GB capacity stores OS and essential files
  • 5 inch form factor mounts in standard drive bays

Specificații

BrandSeagate
SeriesDB35 Series 7200.3
ModelST380215ACE
PackagingBare Drive
InterfaceIDE Ultra ATA100 / ATA-6
Capacity80GB
NAND Flash Memory TypeSLC
RPM7200 RPM
Cache2MB
Form Factor3.5"
Greutate la expediere0.36 kg
Dimensiunile coletului142 × 102 × 20 mm

Întrebări despre acest articol

Will the 3.5" form factor fit a standard desktop drive bay?

Yes, the 3.5" form factor matches standard desktop drive bays and uses the IDE Ultra ATA100 / ATA-6 interface with a 40-pin connector and legacy Molex power connector.

What is the correct master/slave jumper setting for the IDE Ultra ATA100 interface?

Set the jumper to Master for a single drive or the primary drive on the cable; set to Slave only if a second drive shares the same IDE channel.

How often should I verify the SMART data on this 7200 RPM drive?

Check SMART attributes monthly using a tool like CrystalDiskInfo; watch for rising reallocated-sector counts or seek-error rates that signal mechanical wear.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.