Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Silver 3.5 inch bare hard drive with exposed circuit board

Seagate

Seagate ST380215ACE 80GB 7200 RPM 2MB IDE 3.5" internal hard drive

SKU CH-MP4T-5PDFK MPN ST380215ACE

An 80 GB IDE desktop drive spinning at 7200 RPM with 2 MB cache, supplied as a bare 3.5" unit

  • PackagingBare Drive
  • InterfaceIDE Ultra ATA100 / ATA-6
  • Capacity80GB
  • NAND Flash Memory TypeSLC
  • RPM7200 RPM
  • Cache2MB
  • 7200 RPM spindle speed enables quick data access
  • 2 MB cache buffers bursts for smoother throughput
  • IDE Ultra ATA100 interface fits legacy desktop builds
  • 80 GB capacity stores OS and essential files
  • 5 inch form factor mounts in standard drive bays

80 GB IDE Desktop Drive

This is a refurbished Seagate DB35 Series 7200.3 internal hard drive with an 80 GB capacity. It uses a 3.5 inch form factor and connects via an IDE Ultra ATA100 / ATA-6 interface. The drive spins at 7200 RPM and includes a 2 MB cache. It is intended for desktop systems that require a legacy parallel ATA storage device.

Suits legacy desktops only

This drive suits technicians repairing or maintaining older desktop computers equipped with IDE controllers. It is not for builders assembling modern systems that lack IDE ports, nor for users who need higher capacities or solid-state performance. The bare drive packaging means no cables or mounting hardware are included.

IDE Ultra ATA100 interface decides fit

The single specification that determines compatibility is the IDE Ultra ATA100 / ATA-6 interface. Your motherboard or controller card must provide a matching 40-pin IDE connector and support the ATA-6 protocol. Without that specific legacy interface, this drive cannot be installed or used.

Přednosti

  • 7200 RPM spindle speed enables quick data access
  • 2 MB cache buffers bursts for smoother throughput
  • IDE Ultra ATA100 interface fits legacy desktop builds
  • 80 GB capacity stores OS and essential files
  • 5 inch form factor mounts in standard drive bays

Specifikace

BrandSeagate
SeriesDB35 Series 7200.3
ModelST380215ACE
PackagingBare Drive
InterfaceIDE Ultra ATA100 / ATA-6
Capacity80GB
NAND Flash Memory TypeSLC
RPM7200 RPM
Cache2MB
Form Factor3.5"
Přepravní hmotnost0.36 kg
Rozměry balení142 × 102 × 20 mm

Otázky k tomuto produktu

Will the 3.5" form factor fit a standard desktop drive bay?

Yes, the 3.5" form factor matches standard desktop drive bays and uses the IDE Ultra ATA100 / ATA-6 interface with a 40-pin connector and legacy Molex power connector.

What is the correct master/slave jumper setting for the IDE Ultra ATA100 interface?

Set the jumper to Master for a single drive or the primary drive on the cable; set to Slave only if a second drive shares the same IDE channel.

How often should I verify the SMART data on this 7200 RPM drive?

Check SMART attributes monthly using a tool like CrystalDiskInfo; watch for rising reallocated-sector counts or seek-error rates that signal mechanical wear.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.