Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Low-profile horizontal CPU cooler with four copper heat-pipes, aluminium fin stack and 92 mm ARGB PWM fan

Silverstone Technology

Silverstone Technology Hydrogon H90 ARGB Horizontal CPU Cooler 92mm 4 Heat-Pipes

SKU CH-WKSM-B0447

Horizontal 92 mm PWM ARGB cooler with four 6 mm heat-pipes, 48 mm height and 1.3 dB noise for compact builds

  • Low-profile 48 mm height fits tight Mini-ITX builds
  • 11-blade 92 mm PWM fan balances airflow and quiet running
  • Four 6 mm copper heat-pipes with aluminium fins conduct heat efficiently
  • 10 addressable RGB LEDs sync with motherboard or ARGB controller
  • Spring-screw mounting plus anti-vibration pads simplify install and cut noise

Compact Horizontal Cooler for Mini-ITX

The Silverstone Technology Hydrogon H90 ARGB is a low-profile CPU air cooler with a total height of 48mm. It targets builders working with Mini-ITX motherboards and space-constrained cases. Four 6mm copper heat-pipes and aluminium fins handle heat transfer. A 92mm PWM fan with 11 blades provides airflow.

Sustained Load Behaviour

Under continuous load the 92mm PWM fan can reach 2600 RPM while the manufacturer quotes a noise level of 1.3 dB. The four copper heat-pipes move heat from the CPU into the aluminium fin stack. The horizontal layout keeps the cooler within the 48mm height limit so it fits tight chassis without blocking other components.

Installation and Common Issues

Spring-screw mounting brackets are supplied for Intel LGA 2066, 2011, 1700, 1200 and 115x sockets plus AMD AM4. Anti-vibration rubber pads are included to reduce mechanical noise. The 10 addressable RGB LEDs connect to a 4-pin 12 V ARGB header or controller. Builders needing a second cooler or a taller tower design should look elsewhere.

Puncte forte

  • Low-profile 48 mm height fits tight Mini-ITX builds
  • 11-blade 92 mm PWM fan balances airflow and quiet running
  • Four 6 mm copper heat-pipes with aluminium fins conduct heat efficiently
  • 10 addressable RGB LEDs sync with motherboard or ARGB controller
  • Spring-screw mounting plus anti-vibration pads simplify install and cut noise

Specificații

Nicio specificație publicată pentru acest articol deocamdată.

Întrebări despre acest articol

How much noise does the 92mm PWM ARGB fan produce when the cooler runs all day?

The fan is rated at 1.3 dB noise level, and anti-vibrational rubber pads are included for additional dampening during continuous operation.

What must the motherboard already provide for the ARGB lighting to work?

The 10 ARGB LEDs on the fan require a compatible motherboard header or an external ARGB controller to function.

Will the 48mm total height clear low-profile modules on a Mini-ITX board I keep?

At 48mm tall the cooler is designed for Mini-ITX motherboards and space-constrained cases, leaving room for most low-profile memory.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.