Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Low-profile horizontal CPU cooler with four copper heat-pipes, aluminium fin stack and 92 mm ARGB PWM fan

Silverstone Technology

Silverstone Technology Hydrogon H90 ARGB Horizontal CPU Cooler 92mm 4 Heat-Pipes

SKU CH-WKSM-B0447

Horizontal 92 mm PWM ARGB cooler with four 6 mm heat-pipes, 48 mm height and 1.3 dB noise for compact builds

  • Low-profile 48 mm height fits tight Mini-ITX builds
  • 11-blade 92 mm PWM fan balances airflow and quiet running
  • Four 6 mm copper heat-pipes with aluminium fins conduct heat efficiently
  • 10 addressable RGB LEDs sync with motherboard or ARGB controller
  • Spring-screw mounting plus anti-vibration pads simplify install and cut noise

Compact Horizontal Cooler for Mini-ITX

The Silverstone Technology Hydrogon H90 ARGB is a low-profile CPU air cooler with a total height of 48mm. It targets builders working with Mini-ITX motherboards and space-constrained cases. Four 6mm copper heat-pipes and aluminium fins handle heat transfer. A 92mm PWM fan with 11 blades provides airflow.

Sustained Load Behaviour

Under continuous load the 92mm PWM fan can reach 2600 RPM while the manufacturer quotes a noise level of 1.3 dB. The four copper heat-pipes move heat from the CPU into the aluminium fin stack. The horizontal layout keeps the cooler within the 48mm height limit so it fits tight chassis without blocking other components.

Installation and Common Issues

Spring-screw mounting brackets are supplied for Intel LGA 2066, 2011, 1700, 1200 and 115x sockets plus AMD AM4. Anti-vibration rubber pads are included to reduce mechanical noise. The 10 addressable RGB LEDs connect to a 4-pin 12 V ARGB header or controller. Builders needing a second cooler or a taller tower design should look elsewhere.

Prednosti

  • Low-profile 48 mm height fits tight Mini-ITX builds
  • 11-blade 92 mm PWM fan balances airflow and quiet running
  • Four 6 mm copper heat-pipes with aluminium fins conduct heat efficiently
  • 10 addressable RGB LEDs sync with motherboard or ARGB controller
  • Spring-screw mounting plus anti-vibration pads simplify install and cut noise

Špecifikácie

Pre tento produkt zatiaľ nie sú zverejnené žiadne špecifikácie.

Otázky k tomuto produktu

How much noise does the 92mm PWM ARGB fan produce when the cooler runs all day?

The fan is rated at 1.3 dB noise level, and anti-vibrational rubber pads are included for additional dampening during continuous operation.

What must the motherboard already provide for the ARGB lighting to work?

The 10 ARGB LEDs on the fan require a compatible motherboard header or an external ARGB controller to function.

Will the 48mm total height clear low-profile modules on a Mini-ITX board I keep?

At 48mm tall the cooler is designed for Mini-ITX motherboards and space-constrained cases, leaving room for most low-profile memory.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.