Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Ten Molex to dual 15-pin SATA power adapter cables in bulk pack

SMUGDESK

SMUGDESK 10-Pack 4-Pin Molex to Dual 15-Pin SATA Power Adapter Cord Convert SSD Optical Drives

SKU CH-8Y3S-QNV61

Ten-piece pack splits one Molex connector into dual SATA power ports for SSDs, HDDs and optical drives

  • Bulk 10-pack keeps repair shops and builders stocked with spare adapters
  • One 4-pin Molex connector splits into two 15-pin SATA power ports
  • Powers two SATA SSDs, HDDs or optical drives from a single legacy supply lead
  • Copper wiring maintains steady current and reduces voltage drop under load
  • Passive plug-and-play design works inside any desktop chassis without drivers

Bulk adapter pack for PC builders

This ten-piece set converts a single four-pin Molex connector into two fifteen-pin SATA power ports. It targets repair shops, DIY assemblers and anyone adding multiple SATA drives to a desktop chassis. No drivers or software are required for installation.

Steady power delivery under load

High-conductivity copper wiring maintains stable current and reduces voltage drop while both connected drives operate simultaneously. The passive splitter relies on the host power supply's rated capacity, so total device draw must stay within that limit to avoid overload.

Simple plug-and-play fitting

Connect the Molex end to the power supply and attach each SATA plug to a drive; the cables seat with a firm click. Common issues arise when the source connector is already heavily loaded or when SATA data cables are forgotten, as they are not included in the pack.

Puncte forte

  • Bulk 10-pack keeps repair shops and builders stocked with spare adapters
  • One 4-pin Molex connector splits into two 15-pin SATA power ports
  • Powers two SATA SSDs, HDDs or optical drives from a single legacy supply lead
  • Copper wiring maintains steady current and reduces voltage drop under load
  • Passive plug-and-play design works inside any desktop chassis without drivers

Specificații

Nicio specificație publicată pentru acest articol deocamdată.

Întrebări despre acest articol

Will the 15-pin SATA connectors run hot when powering drives continuously from one Molex source?

The adapter uses high-conductivity copper wiring to maintain steady current and reduce voltage drop, so heat stays low under normal working load.

What must my power supply already have to use these 4-pin Molex to dual 15-pin SATA adapters?

Your power supply needs an available 4-pin IDE Molex connector; you also need SATA data cables for each drive, which are not included.

Can I keep my older 4-pin Molex power supply while adding modern SATA SSDs with this 10-pack?

Yes, each adapter converts one legacy Molex connector into two 15-pin SATA power ports so you can run SATA drives on older PSUs.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.