Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green circuit board with mSATA slot and 7-pin SATA connector

SMUGDESK

SMUGDESK mSATA to 7PIN SATA Adapter Card 30 50 mm

SKU CH-7Z0K-50W01

Converts mSATA SSDs to standard 7-pin SATA for desktop upgrades, supporting 30 mm and 50 mm drives at SATA III speeds with no drivers needed

  • Converts mSATA SSD to standard 7pin SATA interface
  • Supports SATA III 6Gbps bandwidth for full SSD speed
  • Works with 30 mm and 50 mm mSATA drives
  • Driverless plug-and-play operation on Windows, Linux, Mac
  • Compact card design saves space inside PC chassis

mSATA to 7PIN SATA Adapter Card

This compact adapter converts a full-size mSATA solid-state drive into a standard 7-pin SATA interface for direct motherboard connection. It enables reuse of existing mSATA storage on desktops with regular SATA ports. No driver installation is required for plug-and-play operation across Windows, Linux and Mac systems.

Suits builders upgrading older systems

Ideal for DIY computer modification, old machine renovation and data backup setups where an mSATA drive needs to connect to a desktop SATA port. Not suitable for users whose motherboard lacks a standard 7-pin SATA connector, or for anyone without a separate SATA power cable from the power supply unit to run the drive.

Supports 30 mm and 50 mm mSATA modules at SATA III

The adapter maintains the original SSD performance through stable signal transmission at full SATA III bandwidth. It accommodates both common mSATA form factors on a small circuit board that saves internal case space during installation.

Puncte forte

  • Converts mSATA SSD to standard 7pin SATA interface
  • Supports SATA III 6Gbps bandwidth for full SSD speed
  • Works with 30 mm and 50 mm mSATA drives
  • Driverless plug-and-play operation on Windows, Linux, Mac
  • Compact card design saves space inside PC chassis

Specificații

Nicio specificație publicată pentru acest articol deocamdată.

Întrebări despre acest articol

How can I confirm the SMUGDESK adapter is passing the full SATA III 6Gbps speed after installation?

Check the negotiated link speed in your BIOS or use a tool like CrystalDiskInfo; it should report SATA 6Gbps for the attached mSATA SSD.

The box includes the adapter card only; do I need to buy a separate SATA power cable and data cable?

Yes, you must supply a standard SATA power connector from your PSU and a 7-pin SATA data cable to the motherboard.

My mSATA SSD is 30 mm long — will this card fit it, or should I choose a different version?

The same card accepts both 30 mm and 50 mm mSATA drives; no other version is required.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.