暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

SMUGDESK

SMUGDESK mSATA to 7PIN SATA Adapter Card 30 50 mm

SKU CH-7Z0K-50W01

Converts mSATA SSDs to standard 7-pin SATA for desktop upgrades, supporting 30 mm and 50 mm drives at SATA III speeds with no drivers needed

  • Converts mSATA SSD to standard 7pin SATA interface
  • Supports SATA III 6Gbps bandwidth for full SSD speed
  • Works with 30 mm and 50 mm mSATA drives
  • Driverless plug-and-play operation on Windows, Linux, Mac
  • Compact card design saves space inside PC chassis

mSATA to 7PIN SATA Adapter Card

This compact adapter converts a full-size mSATA solid-state drive into a standard 7-pin SATA interface for direct motherboard connection. It enables reuse of existing mSATA storage on desktops with regular SATA ports. No driver installation is required for plug-and-play operation across Windows, Linux and Mac systems.

Suits builders upgrading older systems

Ideal for DIY computer modification, old machine renovation and data backup setups where an mSATA drive needs to connect to a desktop SATA port. Not suitable for users whose motherboard lacks a standard 7-pin SATA connector, or for anyone without a separate SATA power cable from the power supply unit to run the drive.

Supports 30 mm and 50 mm mSATA modules at SATA III

The adapter maintains the original SSD performance through stable signal transmission at full SATA III bandwidth. It accommodates both common mSATA form factors on a small circuit board that saves internal case space during installation.

特長

  • Converts mSATA SSD to standard 7pin SATA interface
  • Supports SATA III 6Gbps bandwidth for full SSD speed
  • Works with 30 mm and 50 mm mSATA drives
  • Driverless plug-and-play operation on Windows, Linux, Mac
  • Compact card design saves space inside PC chassis

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

How can I confirm the SMUGDESK adapter is passing the full SATA III 6Gbps speed after installation?

Check the negotiated link speed in your BIOS or use a tool like CrystalDiskInfo; it should report SATA 6Gbps for the attached mSATA SSD.

The box includes the adapter card only; do I need to buy a separate SATA power cable and data cable?

Yes, you must supply a standard SATA power connector from your PSU and a 7-pin SATA data cable to the motherboard.

My mSATA SSD is 30 mm long — will this card fit it, or should I choose a different version?

The same card accepts both 30 mm and 50 mm mSATA drives; no other version is required.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。