Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Rectangular green circuit board, gold edge connector, black controller and NAND chips, silver label, 9.5mm thick

Solidigm

Solidigm D5-P5336 30.72TB E1.L 9.5mm PCIe 4.0 enterprise SSD SBFPFWBV307T001

SKU CH-9V91-W9N0Y MPN SBFPFWBV307T001

30.72 TB enterprise SSD in a 9.5 mm E1.L form factor with PCIe 4.0 interface and 192-layer QLC 3D NAND

  • Form FactorE1.L 9.5mm
  • Capacity30.72TB
  • Memory Components192 L QLC 3D NAND
  • InterfacePCI-Express 4.0
  • MTBF2,000,000 hours
  • Operating Temperature0°C ~ +70°C

Option 30.72TB E1.L

Vedeți celelalte 21 configurații
  • 72TB capacity stores massive datasets in one drive
  • E1.L 9.5mm form factor fits dense server chassis
  • PCI-Express 4.0 interface delivers high-throughput data access
  • 2,000,000 hours MTBF supports continuous enterprise operation
  • 192-layer QLC 3D NAND enables cost-efficient high-density storage

Enterprise QLC SSD for read-heavy workloads

The Solidigm D5-P5336 provides 30.72TB of capacity in an E1.L 9.5mm form factor using 192-layer QLC 3D NAND. It connects via PCI-Express 4.0 x4 and is built for data-centre servers that prioritise density and read throughput over write endurance.

Installation in compatible E1.L bays

The drive slides into a standard E1.L 9.5mm slot and secures with the chassis latch; no cables are required. Ensure the backplane supports PCIe 4.0 x4 and that airflow meets the 0°C to +70°C operating range, otherwise thermal throttling or detection failures can occur.

Capacity decides fit for cold-storage tiers

At 30.72TB this single module replaces multiple smaller drives in archive, content-delivery or object-store clusters where sequential reads dominate. Systems needing sustained random writes or higher write-endurance ratings should evaluate alternative media.

Puncte forte

  • 72TB capacity stores massive datasets in one drive
  • E1.L 9.5mm form factor fits dense server chassis
  • PCI-Express 4.0 interface delivers high-throughput data access
  • 2,000,000 hours MTBF supports continuous enterprise operation
  • 192-layer QLC 3D NAND enables cost-efficient high-density storage

Specificații

BrandSolidigm
SeriesD5-P5336
ModelD5-P5336
Form FactorE1.L 9.5mm
Capacity30.72TB
Memory Components192 L QLC 3D NAND
InterfacePCI-Express 4.0
MTBF2,000,000 hours
Operating Temperature0°C ~ +70°C
Max Shock Resistance1,000 G (Max) at 0.5 msec
Max Vibration ResistanceOperating: 2.17 GRMS (5 - 700 Hz) Max
Non-Operating: 3.13 GRMS (5 - 800 Hz) Max
Greutate la expediere0.37 kg
Dimensiunile coletului369 × 120 × 54 mm

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

How can I confirm the Solidigm D5-P5336 30.72TB SSD is operating correctly after installation?

Verify the drive appears in your server BIOS or OS disk utility at the full 30.72TB capacity with a PCIe 4.0 x4 link, then run a SMART health check to confirm the 192-layer QLC NAND reports zero media errors and a temperature between 0°C and 70°C.

What accessories are included with the SBFPFWBV307T001 and what must be sourced separately?

The single-pack drive ships as the bare E1.L 9.5mm module only; you must supply a compatible E1.L backplane or carrier, PCIe 4.0 cabling or riser, and any required mounting screws or thermal pads for your specific chassis.

Which capacity version of the D5-P5336 series should I choose for a high-density read-intensive array?

The 30.72TB model provides the highest density in the E1.L 9.5mm form factor using 192-layer QLC 3D NAND, maximising rack space efficiency for read-heavy workloads while delivering a 2,000,000-hour MTBF rating.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.