Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black 60x60x10mm square case fan with two wires

SunnyStar Co., Ltd

SunnyStar Co., Ltd 0610-24V 60x60x10mm 24V 0.08A 2-wire case fan

SKU CH-HMDR-W4DTF

A 60 mm hydraulic-bearing case fan running up to 1600 RPM at 24 V with a two-wire connector

  • TypeCase Fan
  • Bearing TypeHydraulic
  • RPM<1600 RPM
  • Noise Level20 - 25 dBA
  • Power Connector2 Wires
  • ColorBlack
  • Hydraulic bearing runs at under 1600 RPM for quiet operation
  • Noise level of 20 to 25 dBA keeps systems unobtrusive
  • 24 V 0.08 A draw suits low-power cooling needs
  • Two-wire power connector enables simple installation
  • Compact 60 by 60 by 10 mm frame fits tight chassis spaces

Compact 60 mm 24 V case fan

The SunnyStar 0610-24V is a 60 by 60 by 10 mm case fan that runs on 24 V DC and draws 0.08 A. It uses a hydraulic bearing and spins below 1600 RPM to produce 20 to 25 dBA of noise. The two-wire power connector supplies voltage only, so speed control or monitoring is not available. It suits tight enclosures such as routers, switches or small-form-factor PCs that provide a 24 V fan header.

Hydraulic bearing and two-wire power

The hydraulic bearing reduces friction for quieter operation at the rated speed range. Because the fan has only two wires, it cannot report RPM to the motherboard and will not respond to PWM signals; voltage regulation is the only way to adjust speed. No LED lighting or extra cables are included, keeping the assembly simple for embedded or industrial use.

Check voltage header and mounting holes

Verify that your device supplies a 24 V DC fan header with a matching two-pin connector before ordering. The 60 mm square frame uses standard mounting-hole spacing, but confirm the clearance around the 10 mm thickness in your chassis. Ensure the 0.08 A current draw is within the header’s rated limit to avoid overload.

Puncte forte

  • Hydraulic bearing runs at under 1600 RPM for quiet operation
  • Noise level of 20 to 25 dBA keeps systems unobtrusive
  • 24 V 0.08 A draw suits low-power cooling needs
  • Two-wire power connector enables simple installation
  • Compact 60 by 60 by 10 mm frame fits tight chassis spaces

Specificații

Series0610-24V
Model0610-24V
TypeCase Fan
Bearing TypeHydraulic
RPM<1600 RPM
Noise Level20 - 25 dBA
Power Connector2 Wires
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions60*60*10mm

Întrebări despre acest articol

How often should the hydraulic bearing in this 0610-24V fan be cleaned or replaced?

Hydraulic bearings are sealed and do not require routine cleaning; replacement is only needed if noise or vibration increases after extended use.

What is the first limit reached when this 60x60x10 mm fan runs continuously at its rated speed?

The fan is rated for speeds under 1600 RPM, so sustained operation will hit that RPM ceiling before any thermal or current limit is reached.

How much heat and noise does this 24 V 0.08 A fan add to a system running all day?

At full speed it produces 20 to 25 dBA of noise, and the motor converts its electrical input into a small amount of waste heat inside the chassis.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.