저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Black 60x60x10mm square case fan with two wires

SunnyStar Co., Ltd

SunnyStar Co., Ltd 0610-24V 60x60x10mm 24V 0.08A 2-wire case fan

SKU CH-HMDR-W4DTF

A 60 mm hydraulic-bearing case fan running up to 1600 RPM at 24 V with a two-wire connector

  • TypeCase Fan
  • Bearing TypeHydraulic
  • RPM<1600 RPM
  • Noise Level20 - 25 dBA
  • Power Connector2 Wires
  • ColorBlack
  • Hydraulic bearing runs at under 1600 RPM for quiet operation
  • Noise level of 20 to 25 dBA keeps systems unobtrusive
  • 24 V 0.08 A draw suits low-power cooling needs
  • Two-wire power connector enables simple installation
  • Compact 60 by 60 by 10 mm frame fits tight chassis spaces

Compact 60 mm 24 V case fan

The SunnyStar 0610-24V is a 60 by 60 by 10 mm case fan that runs on 24 V DC and draws 0.08 A. It uses a hydraulic bearing and spins below 1600 RPM to produce 20 to 25 dBA of noise. The two-wire power connector supplies voltage only, so speed control or monitoring is not available. It suits tight enclosures such as routers, switches or small-form-factor PCs that provide a 24 V fan header.

Hydraulic bearing and two-wire power

The hydraulic bearing reduces friction for quieter operation at the rated speed range. Because the fan has only two wires, it cannot report RPM to the motherboard and will not respond to PWM signals; voltage regulation is the only way to adjust speed. No LED lighting or extra cables are included, keeping the assembly simple for embedded or industrial use.

Check voltage header and mounting holes

Verify that your device supplies a 24 V DC fan header with a matching two-pin connector before ordering. The 60 mm square frame uses standard mounting-hole spacing, but confirm the clearance around the 10 mm thickness in your chassis. Ensure the 0.08 A current draw is within the header’s rated limit to avoid overload.

주요 특징

  • Hydraulic bearing runs at under 1600 RPM for quiet operation
  • Noise level of 20 to 25 dBA keeps systems unobtrusive
  • 24 V 0.08 A draw suits low-power cooling needs
  • Two-wire power connector enables simple installation
  • Compact 60 by 60 by 10 mm frame fits tight chassis spaces

사양

Series0610-24V
Model0610-24V
TypeCase Fan
Bearing TypeHydraulic
RPM<1600 RPM
Noise Level20 - 25 dBA
Power Connector2 Wires
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions60*60*10mm

이 상품에 대한 질문

How often should the hydraulic bearing in this 0610-24V fan be cleaned or replaced?

Hydraulic bearings are sealed and do not require routine cleaning; replacement is only needed if noise or vibration increases after extended use.

What is the first limit reached when this 60x60x10 mm fan runs continuously at its rated speed?

The fan is rated for speeds under 1600 RPM, so sustained operation will hit that RPM ceiling before any thermal or current limit is reached.

How much heat and noise does this 24 V 0.08 A fan add to a system running all day?

At full speed it produces 20 to 25 dBA of noise, and the motor converts its electrical input into a small amount of waste heat inside the chassis.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.