Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black 2U rackmount server chassis with eight front hot-swap drive bays

Supermicro

Supermicro CSE-825TQC-R1K03LPB 2U server chassis 8×3.5″ bays 1000W redundant Titanium

SKU CH-4KZZ-2JD4R MPN CSE-825TQC-R1K03LPB

A 2U rackmount chassis holding eight hot-swap 3.5″ SAS/SATA drives with redundant 1000W Titanium power supplies

  • Chassis TypeRackmount
  • Form Factor2U
  • Motherboard CompatibilityATX, E-ATX up to 13.68”x13”
  • Power SupplyRedundant 1000W Titanium Level (96%+ ) efficiency power supp
  • External 3.5" Drive Bays8
  • FeaturesOptimized for general purpose server and data center 8 x hot
  • Redundant 1000W Titanium supplies cut energy cost with 96%+ efficiency
  • Eight hot-swap 3.5″ SAS bays give high-density storage in 2U
  • 12Gb/s SAS3 backplane moves data fast for demanding workloads
  • Seven low-profile slots fit specialised add-in cards without extra height
  • Three 80mm PWM fans keep thermals steady under heavy load

2U rackmount chassis with eight hot-swap bays

The Supermicro CSE-825TQC-R1K03LPB is a 2U rackmount server chassis built for general-purpose and data-centre deployments. It accommodates ATX and E-ATX motherboards up to 13.68 by 13 inches and supports single or dual Intel and AMD processors. Eight 3.5-inch hot-swap drive bays connect through a 12 Gbps SAS3 backplane with SGPIO signalling. Redundant 1000 W Titanium-certified power supplies provide 96 percent-plus efficiency with PMBus 1.2 and I2C monitoring.

Eight SAS3 bays and redundant Titanium power

The 12 Gbps SAS3 backplane handles eight 3.5-inch SAS or SATA drives simultaneously, delivering full bandwidth to each bay. Two redundant 1000 W Titanium units share the load, so a single supply failure leaves the system running without interruption. Each supply meets 80 PLUS Titanium certification at 96 percent-plus efficiency, reducing heat output and operating cost. The chassis also includes two fixed 3.5-inch bays for additional internal storage.

Seven low-profile slots and three PWM fans

Seven low-profile expansion slots allow add-in cards such as RAID controllers or network adapters while maintaining the 2U height. Three 80 mm heavy-duty fans with PWM speed control move air across the motherboard and drive cage, adjusting automatically to thermal load. Front-panel LEDs report power status, drive activity, dual network activity, power-fail and system information. The unit ships as a chassis only; CPU, motherboard, memory and drives must be supplied separately.

Puncte forte

  • Redundant 1000W Titanium supplies cut energy cost with 96%+ efficiency
  • Eight hot-swap 3.5″ SAS bays give high-density storage in 2U
  • 12Gb/s SAS3 backplane moves data fast for demanding workloads
  • Seven low-profile slots fit specialised add-in cards without extra height
  • Three 80mm PWM fans keep thermals steady under heavy load

Specificații

BrandSUPERMICRO
ModelCSE-825TQC-R1K03LPB
Chassis TypeRackmount
Form Factor2U
Motherboard CompatibilityATX, E-ATX up to 13.68”x13”
Power SupplyRedundant 1000W Titanium Level (96%+ ) efficiency power supplies w/ PMBus 1.2 and I2C
External 3.5" Drive Bays8
FeaturesOptimized for general purpose server and data center
8 x hot-swap 3.5" 12Gb/s SAS3 drive bays
Redundant 1000W Titanium PWS
Default support 205W X11 Dual Processors
Dimensions3.50" x 17.20" x 25.60"
Greutate la expediere25.04 kg
Dimensiunile coletului871 × 678 × 279 mm

Întrebări despre acest articol

Will this chassis fit my existing ATX motherboard and 12 Gb/s SAS drives?

The chassis accepts ATX boards up to 12.0 x 10.0 inches and the backplane runs eight 12 Gb/s SAS3 hot-swap bays, so current SAS and SATA drives install directly.

How can I verify the redundant power supplies are operating correctly after installation?

Each 1000 W Titanium unit reports status through PMBus 1.2 and I2C; the front panel shows a Power Fail LED if either supply drops out.

What drive trays and rails are included for the eight hot-swap bays?

The chassis ships with trays for the eight 3.5-inch hot-swap bays and mounting rails for 2U rack installation.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.