Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
White ATX power supply with gravel sand fan and flat cables

Thermaltake

Thermaltake PS-TPD-1000FNFAGU-S 1000W power supply

SKU CH-MQ5A-79H80 MPN PS-TPD-1000FNFAGU-S

A 1000W fully modular ATX 3.1 power supply with a native 12V-2x6 connector for modern GPUs, Japanese capacitors, a 135mm fan, and 80 Plus Gold efficiency

  • ColorWhite
  • TypeATX 3.1
  • Maximum Power1000 W
  • Fans135mm FDB fan
  • PFCActive
  • Power Good Signal100-150 msec
  • 1000 W output supports demanding builds with ATX 3.1 compliance
  • Native 12V-2x6 connector delivers up to 600 W for modern GPUs
  • 80 PLUS Gold efficiency at 115 V input reduces waste heat
  • Japanese 105 °C main capacitors ensure long-term reliability
  • Full modular flat cables with colour-matched connectors simplify routing

Ready for ATX 3.1 builds

This fully modular 1000 W unit meets the ATX 3.1 specification and carries 80 PLUS Gold certification at 115 V input. White flat cables with colour-matched connectors simplify routing in showcase systems. Japanese 105 °C main capacitors back the high-amperage single +12 V rail and DC-DC plus LLC topology.

Native PCIe 5.1 12V-2x6 connector

A single native 12V-2x6 cable delivers up to 600 W to modern graphics cards without adapters. The matcha dual-coloured H++ connector hides its green indicator when fully seated, giving a clear visual confirmation. This connector is the deciding factor for builders targeting PCIe 5.1 GPUs.

135 mm FDB fan and protection suite

A gravel-sand coloured 135 mm fluid-dynamic-bearing fan handles cooling while keeping noise low under typical loads. Protections include OCP, OVP, UVP, SCP, OPP, OTP and NLO. Hold-up time exceeds 17 ms at 80 % load and the power-good signal arrives in 100-150 ms.

Puncte forte

  • 1000 W output supports demanding builds with ATX 3.1 compliance
  • Native 12V-2x6 connector delivers up to 600 W for modern GPUs
  • 80 PLUS Gold efficiency at 115 V input reduces waste heat
  • Japanese 105 °C main capacitors ensure long-term reliability
  • Full modular flat cables with colour-matched connectors simplify routing

Specificații

BrandThermaltake
ModelPS-TPD-1000FNFAGU-S
ColorWhite
TypeATX 3.1
Maximum Power1000 W
Fans135mm FDB fan
PFCActive
Power Good Signal100-150 msec
Hold-up Time> 17msec at 80% load
EfficiencyMeet 80 PLUS® Gold at 115Vac input.
Energy-Efficient80 PLUS GOLD Certified
Input Voltage100 - 240 V
Input Frequency Range47 - 63 Hz
Input Current12.0A Max
MTBF100
Dimensions5.9in x 5.5in x 3.4 in
Weight6.2lbs
Greutate la expediere3.27 kg
Dimensiunile coletului300 × 211 × 122 mm

Întrebări despre acest articol

How does the 1000W rating translate to real GPU power delivery?

The unit includes a native PCIe 5.1 12V-2x6 cable rated for 600W, so a single modern graphics card can draw its full spec without adapters.

What does ATX 3.1 actually limit on this PSU?

ATX 3.1 lets the supply handle 3x GPU power excursions and 2x total power excursions while staying within spec.

Will the 5.9in x 5.5in x 3.4in chassis fit a standard ATX case?

Those dimensions match the regular ATX form factor, so it mounts in any case built for an ATX power supply.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.