Timetec
Timetec Pinnacle Gaming 1TB PCIe 4.0 NVMe M.2 2280 internal SSD
1TB PCIe 4.0 NVMe M.2 2280 SSD with graphene heat spreader, up to 7400/6100 MB/s speeds and 2000TBW endurance for PS5 Pro and PC
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity1TB
- Memory Components3D NAND TLC
- Max Sequential ReadUp to 7400 MBps
- Sequential reads up to 7400 MB/s load games and files in seconds
- Sequential writes up to 6100 MB/s keep large projects moving without delay
- 3D NAND TLC with Phison PS5027-E27T controller delivers sustained speed and endurance
- 1500000 hours MTBF plus 2000 TBW rating protect data over years of heavy use
- Ultra-thin graphene heat spreader fits PS5 Pro and laptops without clearance issues
Timetec Pinnacle Gaming 1TB NVMe SSD
This 1TB internal SSD uses a PCIe 4.0 NVMe interface and an M.2 2280 form factor with 3D NAND TLC memory. It is built for gamers and content creators who need fast sequential read speeds up to 7400 MBps and write speeds up to 6100 MBps. The Phison PS5027-E27T controller manages performance across desktop, laptop and PS5 Pro platforms.
Check your M.2 slot and operating system
Verify that your motherboard or laptop has an M.2 2280 slot that supports NVMe PCIe Gen4x4 signalling. The drive is backwards compatible with PCIe Gen3, Gen2 and Gen1 but will run at the slower generation speed. Supported operating systems include Windows 7 through Windows 11 and Linux kernel 2.6.33 or later.
Graphene heat spreader and endurance ratings
An ultra-thin graphene heat spreader keeps the controller cool without adding height, so the drive fits tight laptop bays and PS5 Pro expansion slots. Endurance is rated at 2000 TBW with a 1500000 hour MTBF. The firmware supports S.M.A.R.T., TRIM, garbage collection, wear levelling, bad block management and end-to-end data protection under NVMe 1.4.
Puncte forte
- Sequential reads up to 7400 MB/s load games and files in seconds
- Sequential writes up to 6100 MB/s keep large projects moving without delay
- 3D NAND TLC with Phison PS5027-E27T controller delivers sustained speed and endurance
- 1500000 hours MTBF plus 2000 TBW rating protect data over years of heavy use
- Ultra-thin graphene heat spreader fits PS5 Pro and laptops without clearance issues
Specificații
| Brand | Timetec |
|---|---|
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Memory Components | 3D NAND TLC |
| Max Sequential Read | Up to 7400 MBps |
| Max Sequential Write | Up to 6100 MBps |
Întrebări despre acest articol
Will this drive fit in a PlayStation 5 Pro without extra parts?
Yes, the M.2 2280 form factor and thin graphene heat spreader meet the PS5 Pro expansion slot requirements.
Does the SSD work with a motherboard that only has PCIe 3.0 slots?
Yes, the drive is backwards compatible with PCIe Gen 3, Gen 2 and Gen 1, so it will operate at the slot's maximum speed.
What software or drivers are needed to use the drive on Windows 11?
No extra drivers are required; Windows 11 supports NVMe 1.4 natively and the drive works immediately after installation.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
