Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black 6-foot Y-splitter cable with twist-lock L6-30P plug and two C13 connectors, 12 AWG copper, PVC jacket

Valiant Power

Valiant Power L6-30P to Dual C13 6ft 12AWG 240V 30A mining hardware

SKU CH-72Y5-X6D55

Heavy-duty 12 AWG splitter powers two C13 devices from a single 240V 30A twist-lock outlet, rated for 7200 W total with a 6 ft SJT PVC jacket

  • Powers two miners from one 240V 30A outlet using L6-30P to dual C13 Y splitter
  • 12 AWG pure copper conductors handle continuous high-wattage loads safely up to 7200W total
  • 6ft flexible cable with molded connectors fits tight rack or crypto farm layouts
  • PVC jacket rated to 105°C resists heat in dense server or mining environments
  • Compatible with Bitmain Antminers, rack PDUs, switches and other C13-equipped hardware

L6-30P Splitter for Dual C13 Devices

The Valiant Power L6-30P to Dual C13 cable splits a single 240V 30A twist-lock outlet into two IEC C13 connections. It targets miners and server operators who need to power two high-draw units such as ASIC miners, rack PDUs or switches from one heavy-duty feed. The six-foot length and 12 AWG pure copper conductors suit rack rows and crypto farms where dense, reliable distribution matters.

Build Integration and Cable Management

The Y splitter reduces the number of inlet cords running to a rack PDU or wall receptacle, freeing space in crowded vertical channels. Its moulded connectors lock securely into NEMA L6-30P and C13 ports, while the flexible SJT PVC jacket routes cleanly through cable managers without stiff bends. No additional adapters are required for standard C13 equipment, so deployment is a direct plug-in.

Sustained Load Behaviour

Rated for 30 amps continuous at 240 volts, the assembly supports up to 7200 watts total across both branches without overheating. The 105°C jacket rating and stranded copper core maintain stable delivery during 24/7 mining or server workloads, avoiding the voltage sag and insulation stress seen on lighter cords under prolonged maximum draw.

Puncte forte

  • Powers two miners from one 240V 30A outlet using L6-30P to dual C13 Y splitter
  • 12 AWG pure copper conductors handle continuous high-wattage loads safely up to 7200W total
  • 6ft flexible cable with molded connectors fits tight rack or crypto farm layouts
  • PVC jacket rated to 105°C resists heat in dense server or mining environments
  • Compatible with Bitmain Antminers, rack PDUs, switches and other C13-equipped hardware

Specificații

Nicio specificație publicată pentru acest articol deocamdată.

Întrebări despre acest articol

Can I run two Antminers from one L6-30P outlet with this splitter?

Yes, the L6-30P plug feeds two C13 outlets rated for 30 A total, so two compatible miners can share one 240 V circuit.

Is the 6 ft length enough for typical rack-to-PDU runs?

At 1.8 metres the cable reaches across standard rack widths and short vertical spans; measure your exact path before ordering.

Will the 12 AWG copper handle continuous 7200 W loads without overheating?

The 12 AWG stranded copper conductors and 105 °C-rated PVC jacket are built for sustained 30 A / 7200 W operation in mining and data-centre environments.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.