暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 6-foot Y-splitter cable with twist-lock L6-30P plug and two C13 connectors, 12 AWG copper, PVC jacket

Valiant Power

Valiant Power L6-30P to Dual C13 6ft 12AWG 240V 30A mining hardware

SKU CH-72Y5-X6D55

Heavy-duty 12 AWG splitter powers two C13 devices from a single 240V 30A twist-lock outlet, rated for 7200 W total with a 6 ft SJT PVC jacket

  • Powers two miners from one 240V 30A outlet using L6-30P to dual C13 Y splitter
  • 12 AWG pure copper conductors handle continuous high-wattage loads safely up to 7200W total
  • 6ft flexible cable with molded connectors fits tight rack or crypto farm layouts
  • PVC jacket rated to 105°C resists heat in dense server or mining environments
  • Compatible with Bitmain Antminers, rack PDUs, switches and other C13-equipped hardware

L6-30P Splitter for Dual C13 Devices

The Valiant Power L6-30P to Dual C13 cable splits a single 240V 30A twist-lock outlet into two IEC C13 connections. It targets miners and server operators who need to power two high-draw units such as ASIC miners, rack PDUs or switches from one heavy-duty feed. The six-foot length and 12 AWG pure copper conductors suit rack rows and crypto farms where dense, reliable distribution matters.

Build Integration and Cable Management

The Y splitter reduces the number of inlet cords running to a rack PDU or wall receptacle, freeing space in crowded vertical channels. Its moulded connectors lock securely into NEMA L6-30P and C13 ports, while the flexible SJT PVC jacket routes cleanly through cable managers without stiff bends. No additional adapters are required for standard C13 equipment, so deployment is a direct plug-in.

Sustained Load Behaviour

Rated for 30 amps continuous at 240 volts, the assembly supports up to 7200 watts total across both branches without overheating. The 105°C jacket rating and stranded copper core maintain stable delivery during 24/7 mining or server workloads, avoiding the voltage sag and insulation stress seen on lighter cords under prolonged maximum draw.

特長

  • Powers two miners from one 240V 30A outlet using L6-30P to dual C13 Y splitter
  • 12 AWG pure copper conductors handle continuous high-wattage loads safely up to 7200W total
  • 6ft flexible cable with molded connectors fits tight rack or crypto farm layouts
  • PVC jacket rated to 105°C resists heat in dense server or mining environments
  • Compatible with Bitmain Antminers, rack PDUs, switches and other C13-equipped hardware

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Can I run two Antminers from one L6-30P outlet with this splitter?

Yes, the L6-30P plug feeds two C13 outlets rated for 30 A total, so two compatible miners can share one 240 V circuit.

Is the 6 ft length enough for typical rack-to-PDU runs?

At 1.8 metres the cable reaches across standard rack widths and short vertical spans; measure your exact path before ordering.

Will the 12 AWG copper handle continuous 7200 W loads without overheating?

The 12 AWG stranded copper conductors and 105 °C-rated PVC jacket are built for sustained 30 A / 7200 W operation in mining and data-centre environments.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。