Vetroo Sakura ARGB120 PK 3-pack 120mm pink ARGB PWM case fans
- 3 Fans
- Case Fan
Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.
Vetroo
Three white 120 mm case fans with ARGB lighting, PWM control and a supplied controller deliver up to 48.1 CFM airflow at 26 dBA
Number 3-Pack w/ Controller
Versiunile tăiate există, dar nu sunt disponibile aici.
The Vetroo ICE BLADE ARGB120 WT pack delivers three 120 mm white-frame fans with addressable RGB lighting and a bundled controller. Each unit spins up to 1600 RPM and moves between 35 and 40 CFM while producing 20 to 25 dBA. A 5 V 3-pin header syncs colours with compatible motherboards, and PWM adjusts speed automatically.
The included controller and remote let you set effects or fan curves without software, ideal for first-time builders or clean white-themed builds. Buyers who need higher static pressure for dense radiators or prefer a single premium fan with longer rated life should look elsewhere.
Hydro bearings and eight rubber pads keep vibration low during extended sessions, while the PWM curve holds speeds between 800 and 1300 RPM as chassis temperature rises. Rated output reaches 48.1 CFM at 26 dBA, and the 12 V 0.35 A draw stays consistent over long gaming or rendering periods.
| Brand | Vetroo |
|---|---|
| Series | ICE BLADE |
| Model | ARGB120 WT |
| Fan Counts | 3 Fans |
| Type | Case Fan |
| Compatibility | Case |
| Fan Thickness | 25mm |
| Bearing Type | Hydro Bearing |
| RPM | <1600 RPM |
| Air Flow | 35-40 CFM |
| Noise Level | 20 - 25 dBA |
| Power Connector | 3 / 4 Pin |
| Color | White |
| LED | ARGB |
| Dimensions | 120 * 25* 120 mm |
Alte versiuni ale acestui model
Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.
Yes, the ARGB LEDs sync through a 5V 3-pin motherboard header; the included controller and remote can also drive the lighting if your board lacks that header.
Yes, the fans use a 3/4-pin connector and the supplied controller handles PWM speed curves, so they work with older 3-pin headers while still offering automatic 800-1300 RPM adjustment.
Check the fan speed readout in your BIOS or monitoring software; at typical loads the fans should report between 800 and 1300 RPM, matching the PWM curve.
Tot din acest raion
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
În ce monedă plătiți și în ce monedă citiți prețurile.
Trimis din portofelul dumneavoastră la finalizarea comenzii
Doar pentru afișare — catalogul este exprimat în dolari
Nicio monedă nu corespunde.
Alegeți limba în care vă vorbește site-ul.
Prima vizită?
Aveți deja un cont?
Nu există o resetare automată: acest magazin nu trimite niciun e-mail, deci nu există niciun link de unică folosință de solicitat. Lăsați adresa în cont. Va fi tratată manual.
Cerere înregistrată
Nu veți primi nimic în căsuța de e-mail — acest magazin nu trimite niciun e-mail. Cineva se ocupă de asta manual.
V-ați amintit-o?