Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Three white 120mm square case fans with ARGB lighting and transparent blades, shown with controller and remote

Vetroo

Vetroo ICE BLADE ARGB120 WT 3 Pack 120mm White Case Fans

SKU CH-4R0C-RTBH7

Three white 120 mm case fans with ARGB lighting, PWM control and a supplied controller deliver up to 48.1 CFM airflow at 26 dBA

  • Fan Counts3 Fans
  • TypeCase Fan
  • CompatibilityCase
  • Fan Thickness25mm
  • Bearing TypeHydro Bearing
  • RPM<1600 RPM

Color White

Number 3-Pack w/ Controller

  • 1-Pack
  • 3-Pack w/ Controller

Přeškrtnuté varianty existují, ale zde nejsou skladem.

  • ARGB sync via 5V 3-pin header for unified lighting
  • PWM auto-adjusts 800-1300 RPM to chassis temperature
  • 8 rubber pads plus hydraulic bearing cut noise to 20-25 dBA
  • Included controller and remote manage RGB effects and fan speed
  • 9-blade design pushes 35-40 CFM for strong case airflow

Three-fan ARGB cooling kit

The Vetroo ICE BLADE ARGB120 WT pack delivers three 120 mm white-frame fans with addressable RGB lighting and a bundled controller. Each unit spins up to 1600 RPM and moves between 35 and 40 CFM while producing 20 to 25 dBA. A 5 V 3-pin header syncs colours with compatible motherboards, and PWM adjusts speed automatically.

Builders wanting coordinated lighting

The included controller and remote let you set effects or fan curves without software, ideal for first-time builders or clean white-themed builds. Buyers who need higher static pressure for dense radiators or prefer a single premium fan with longer rated life should look elsewhere.

Steady airflow under continuous load

Hydro bearings and eight rubber pads keep vibration low during extended sessions, while the PWM curve holds speeds between 800 and 1300 RPM as chassis temperature rises. Rated output reaches 48.1 CFM at 26 dBA, and the 12 V 0.35 A draw stays consistent over long gaming or rendering periods.

Přednosti

  • ARGB sync via 5V 3-pin header for unified lighting
  • PWM auto-adjusts 800-1300 RPM to chassis temperature
  • 8 rubber pads plus hydraulic bearing cut noise to 20-25 dBA
  • Included controller and remote manage RGB effects and fan speed
  • 9-blade design pushes 35-40 CFM for strong case airflow

Specifikace

BrandVetroo
SeriesICE BLADE
ModelARGB120 WT
Fan Counts3 Fans
TypeCase Fan
CompatibilityCase
Fan Thickness25mm
Bearing TypeHydro Bearing
RPM<1600 RPM
Air Flow35-40 CFM
Noise Level20 - 25 dBA
Power Connector3 / 4 Pin
ColorWhite
LEDARGB
Dimensions120 * 25* 120 mm

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Does my motherboard need a 5V 3-pin ARGB header to synchronise the lighting on these fans?

Yes, the ARGB LEDs sync through a 5V 3-pin motherboard header; the included controller and remote can also drive the lighting if your board lacks that header.

Will the bundled PWM controller let me run these fans on a motherboard that only has 3-pin voltage-controlled headers?

Yes, the fans use a 3/4-pin connector and the supplied controller handles PWM speed curves, so they work with older 3-pin headers while still offering automatic 800-1300 RPM adjustment.

After installing the fans, how can I confirm they are spinning within the intended 800-1300 RPM range?

Check the fan speed readout in your BIOS or monitoring software; at typical loads the fans should report between 800 and 1300 RPM, matching the PWM curve.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.