Vetroo
Vetroo 20-Port Fan Hub with Remote, SATA Power, 10 PWM + 10 ARGB (Pink)
- Pink
- ARGB
14,99 US$
0.00019292BTC
Skladem
Vetroo
Vetroo Sakura ARGB120 PK 3-pack 120mm pink ARGB PWM case fans
Three 120 mm pink ARGB PWM fans with hydro bearings deliver 35-40 CFM airflow at 20-25 dBA and include a controller and remote for lighting and speed sync
- Fan Counts3 Fans
- TypeCase Fan
- CompatibilityCase
- Fan Thickness25mm
- Bearing TypeHydro Bearing
- RPM<1600 RPM
Number 3-Pack w/ Controller
- 1-Pack
- 3-Pack w/ Controller
Přeškrtnuté varianty existují, ale zde nejsou skladem.
- ARGB lighting syncs via 5 V 3-pin motherboard header
- PWM control adjusts 800–1300 RPM to chassis temperature
- 8 rubber pads plus hydraulic bearing keep noise to 20–26 dBA
- Included controller and remote customise lighting and fan speed
- 9-blade design delivers 35–48 CFM airflow through 120 mm frame
Three-pack ARGB cooling
This set contains three 120 mm pink case fans with addressable RGB lighting and PWM speed control. They connect through a standard 3 or 4 pin header and sync with a 5 V three-pin motherboard socket. The bundle includes a dedicated controller and remote for lighting and speed adjustments without software.
Sustained airflow behaviour
The fans run between 800 and 1300 RPM under PWM control, scaling speed with chassis temperature rather than spinning at a fixed rate. Hydrodynamic bearings rated for up to 50 000 hours maintain consistent rotation during long sessions. Maximum airflow reaches 48.1 CFM when the curve demands peak cooling.
Thermals, noise and power
At typical operating speeds the fans produce 26 dBA while drawing 1.92 W at 12 V. Eight rubber vibration pads on each frame dampen mechanical resonance transferred to the case. The hydraulic bearing design keeps friction low, helping the units stay quiet throughout extended use.
Přednosti
- ARGB lighting syncs via 5 V 3-pin motherboard header
- PWM control adjusts 800–1300 RPM to chassis temperature
- 8 rubber pads plus hydraulic bearing keep noise to 20–26 dBA
- Included controller and remote customise lighting and fan speed
- 9-blade design delivers 35–48 CFM airflow through 120 mm frame
Specifikace
| Brand | Vetroo |
|---|---|
| Series | Sakura |
| Model | ARGB120 PK |
| Fan Counts | 3 Fans |
| Type | Case Fan |
| Compatibility | Case |
| Fan Thickness | 25mm |
| Bearing Type | Hydro Bearing |
| RPM | <1600 RPM |
| Air Flow | 35-40 CFM |
| Noise Level | 20 - 25 dBA |
| Power Connector | 3 / 4 Pin |
| Color | Pink |
| LED | ARGB |
| Dimensions | 120 * 25* 120 mm |
Další verze tohoto modelu
Dalších 5 v této řadě
Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.
Vetroo
Vetroo ICE BLADE ARGB120 WT 3-pack 120mm ARGB PWM case fans
- 3 Fans
- Case Fan
22,99 US$
0.00029587BTC
Skladem
Vetroo
Vetroo ICE BLADE ARGB120 WT 3 Pack 120mm White Case Fans
- 3 Fans
- Case Fan
23,99 US$
0.00030874BTC
Skladem
Vetroo
Vetroo AL800 Mid Tower ATX PC Case Black
- Rear: 1x 120mm ARGB…
- Bottom
51,99 US$
0.00066909BTC
SklademOtázky k tomuto produktu
How loud are the Vetroo Sakura ARGB120 PK fans when they run continuously at full speed?
The fans reach a maximum noise level of 26 dBA at full speed, while the PWM range keeps them between 20 and 25 dBA during typical all-day operation.
Do I need a 5V 3-pin ARGB header on my motherboard to use the lighting on these three fans?
Yes, the ARGB lighting synchronises through a 5V 3-pin motherboard header; the included controller and remote provide an alternative if your board lacks that connector.
Will the 3-pin and 4-pin power connectors on these fans work with an older motherboard that only has 3-pin headers?
Each fan includes both 3-pin and 4-pin connectors, so they will run on legacy 3-pin headers, though PWM speed control requires the 4-pin connection.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 US$
0.00001055BTC
Skladem