Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen

Vetroo

Vetroo Sakura ARGB120 PK 3-pack 120mm pink ARGB PWM case fans

SKU CH-34JJ-9HC52

Three 120 mm pink ARGB PWM fans with hydro bearings deliver 35-40 CFM airflow at 20-25 dBA and include a controller and remote for lighting and speed sync

  • Fan Counts3 Fans
  • TypeCase Fan
  • CompatibilityCase
  • Fan Thickness25mm
  • Bearing TypeHydro Bearing
  • RPM<1600 RPM

Color Pink

Number 3-Pack w/ Controller

  • 1-Pack
  • 3-Pack w/ Controller

Doorgestreepte varianten bestaan wel, maar zijn hier niet op voorraad.

  • ARGB lighting syncs via 5 V 3-pin motherboard header
  • PWM control adjusts 800–1300 RPM to chassis temperature
  • 8 rubber pads plus hydraulic bearing keep noise to 20–26 dBA
  • Included controller and remote customise lighting and fan speed
  • 9-blade design delivers 35–48 CFM airflow through 120 mm frame

Three-pack ARGB cooling

This set contains three 120 mm pink case fans with addressable RGB lighting and PWM speed control. They connect through a standard 3 or 4 pin header and sync with a 5 V three-pin motherboard socket. The bundle includes a dedicated controller and remote for lighting and speed adjustments without software.

Sustained airflow behaviour

The fans run between 800 and 1300 RPM under PWM control, scaling speed with chassis temperature rather than spinning at a fixed rate. Hydrodynamic bearings rated for up to 50 000 hours maintain consistent rotation during long sessions. Maximum airflow reaches 48.1 CFM when the curve demands peak cooling.

Thermals, noise and power

At typical operating speeds the fans produce 26 dBA while drawing 1.92 W at 12 V. Eight rubber vibration pads on each frame dampen mechanical resonance transferred to the case. The hydraulic bearing design keeps friction low, helping the units stay quiet throughout extended use.

Pluspunten

  • ARGB lighting syncs via 5 V 3-pin motherboard header
  • PWM control adjusts 800–1300 RPM to chassis temperature
  • 8 rubber pads plus hydraulic bearing keep noise to 20–26 dBA
  • Included controller and remote customise lighting and fan speed
  • 9-blade design delivers 35–48 CFM airflow through 120 mm frame

Specificaties

BrandVetroo
SeriesSakura
ModelARGB120 PK
Fan Counts3 Fans
TypeCase Fan
CompatibilityCase
Fan Thickness25mm
Bearing TypeHydro Bearing
RPM<1600 RPM
Air Flow35-40 CFM
Noise Level20 - 25 dBA
Power Connector3 / 4 Pin
ColorPink
LEDARGB
Dimensions120 * 25* 120 mm

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

How loud are the Vetroo Sakura ARGB120 PK fans when they run continuously at full speed?

The fans reach a maximum noise level of 26 dBA at full speed, while the PWM range keeps them between 20 and 25 dBA during typical all-day operation.

Do I need a 5V 3-pin ARGB header on my motherboard to use the lighting on these three fans?

Yes, the ARGB lighting synchronises through a 5V 3-pin motherboard header; the included controller and remote provide an alternative if your board lacks that connector.

Will the 3-pin and 4-pin power connectors on these fans work with an older motherboard that only has 3-pin headers?

Each fan includes both 3-pin and 4-pin connectors, so they will run on legacy 3-pin headers, though PWM speed control requires the 4-pin connection.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.