Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Small green circuit board with micro-USB port and pin headers

Vszerda

Vszerda CP2112 Debug Board USB to SMBus I2C Module 2.0 MicroUSB Evaluation Kit for CCS811 Sensor

SKU CH-5AFN-H7KGM

USB-to-SMBus bridge board with CP2112 controller, eight configurable GPIOs, 12 Mbps full-speed USB 2.0, on-board 3.45 V regulator and 194-byte OTP ROM

  • USB-powered development at 4.0–5.25 V
  • Wide –40 °C to 85 °C operating range
  • Native HID drivers on Windows, Mac, Linux
  • Eight configurable GPIO pins for custom I/O
  • 512-byte SMBus buffer speeds data transfers

USB-to-SMBus bridge for sensor development

The Vszerda CP2112 Debug Board provides a USB 2.0 full-speed interface to SMBus and I2C devices. It targets engineers and hobbyists who need to communicate with sensors such as the CCS811 without writing custom firmware. The board enumerates as a standard HID device on Windows, Mac and Linux.

GUI configurator and GPIO flexibility simplify

An on-chip 194-byte one-time programmable ROM stores custom product data while a 512-byte SMBus buffer handles traffic. Eight GPIOs are configurable as input, output, open-drain or push-pull, and a configurable clock output is available. The GUI-based configurator removes the need for complex driver development.

USB bus power or external supply with wide

The module accepts USB bus power from 4.0 to 5.25 V or a self-powered 3.0 to 3.6 V source, with I/O voltage from 1.8 V up to VDD. It operates from -40 °C to 85 °C. Builders who require isolated power domains or voltage-level translation beyond the stated ranges will need additional circuitry.

Puncte forte

  • USB-powered development at 4.0–5.25 V
  • Wide –40 °C to 85 °C operating range
  • Native HID drivers on Windows, Mac, Linux
  • Eight configurable GPIO pins for custom I/O
  • 512-byte SMBus buffer speeds data transfers

Specificații

Nicio specificație publicată pentru acest articol deocamdată.

Întrebări despre acest articol

Will the 194-byte OTP ROM or the CP2112 bridge chip itself need replacement after extended development cycles?

The 194-byte one-time programmable ROM is written once and cannot be rewritten, so plan final values carefully. The CP2112 bridge controller is a solid-state USB 2.0 full-speed device with no moving parts or rated write-endurance limit, so it does not require scheduled replacement.

Which electrical limit appears first when the board runs continuously at the top of its temperature range?

The on-chip 3.45 V regulator and I/O voltage window of 1.8 V to VDD set the thermal ceiling; sustained operation at 85 °C can push the regulator toward its current limit before the -40 °C to 85 °C ambient spec is exceeded.

How much heat and noise does the module produce when powered from USB all day?

The board draws power from the USB 2.0 bus at 4.0–5.25 V with no fan or active cooling, so it runs silently and generates only low heat typical of a 12 Mbps full-speed bridge controller.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.