Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Small green circuit board with micro-USB port and pin headers

Vszerda

Vszerda CP2112 Debug Board USB to SMBus I2C Module 2.0 MicroUSB Evaluation Kit for CCS811 Sensor

SKU CH-5AFN-H7KGM

USB-to-SMBus bridge board with CP2112 controller, eight configurable GPIOs, 12 Mbps full-speed USB 2.0, on-board 3.45 V regulator and 194-byte OTP ROM

  • USB-powered development at 4.0–5.25 V
  • Wide –40 °C to 85 °C operating range
  • Native HID drivers on Windows, Mac, Linux
  • Eight configurable GPIO pins for custom I/O
  • 512-byte SMBus buffer speeds data transfers

USB-to-SMBus bridge for sensor development

The Vszerda CP2112 Debug Board provides a USB 2.0 full-speed interface to SMBus and I2C devices. It targets engineers and hobbyists who need to communicate with sensors such as the CCS811 without writing custom firmware. The board enumerates as a standard HID device on Windows, Mac and Linux.

GUI configurator and GPIO flexibility simplify

An on-chip 194-byte one-time programmable ROM stores custom product data while a 512-byte SMBus buffer handles traffic. Eight GPIOs are configurable as input, output, open-drain or push-pull, and a configurable clock output is available. The GUI-based configurator removes the need for complex driver development.

USB bus power or external supply with wide

The module accepts USB bus power from 4.0 to 5.25 V or a self-powered 3.0 to 3.6 V source, with I/O voltage from 1.8 V up to VDD. It operates from -40 °C to 85 °C. Builders who require isolated power domains or voltage-level translation beyond the stated ranges will need additional circuitry.

Pluspunten

  • USB-powered development at 4.0–5.25 V
  • Wide –40 °C to 85 °C operating range
  • Native HID drivers on Windows, Mac, Linux
  • Eight configurable GPIO pins for custom I/O
  • 512-byte SMBus buffer speeds data transfers

Specificaties

Voor dit artikel zijn nog geen specificaties gepubliceerd.

Vragen over dit artikel

Will the 194-byte OTP ROM or the CP2112 bridge chip itself need replacement after extended development cycles?

The 194-byte one-time programmable ROM is written once and cannot be rewritten, so plan final values carefully. The CP2112 bridge controller is a solid-state USB 2.0 full-speed device with no moving parts or rated write-endurance limit, so it does not require scheduled replacement.

Which electrical limit appears first when the board runs continuously at the top of its temperature range?

The on-chip 3.45 V regulator and I/O voltage window of 1.8 V to VDD set the thermal ceiling; sustained operation at 85 °C can push the regulator toward its current limit before the -40 °C to 85 °C ambient spec is exceeded.

How much heat and noise does the module produce when powered from USB all day?

The board draws power from the USB 2.0 bus at 4.0–5.25 V with no fan or active cooling, so it runs silently and generates only low heat typical of a 12 Mbps full-speed bridge controller.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.