Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black USB 3.0 to SATA IDE adapter with power supply

WRIARICH

WRIARICH E19 USB 3.0 to SATA IDE Hard Drive Adapter

SKU CH-78B3-STY2T

Connects 2.5 or 3.5 inch SATA and IDE drives to USB 3.0 at up to 5Gb/s with included 12V power

  • ColorBlack
  • Changer TypeUSB to IDE&SATA
  • SpecificationsAll in One Solution to Connect to Different Types of Interfa
  • Package ContentsAll in One Solution to Connect to Different Types of Interfa
  • Connect 2.5 or 3.5 inch SATA and IDE drives via USB 3.0
  • Transfer data at up to 5Gb/s, 10 times faster than USB 2.0
  • Works with Windows, Mac OS, Linux and Chrome OS
  • Includes 12V DC power supply for 3.5 inch drives
  • On/Off switch protects connected hard drives

Universal SATA and IDE Drive Adapter

The WRIARICH E19 connects 2.5in or 3.5in SATA and IDE hard drives, solid-state drives and optical drives to a USB 3.0 port. It suits technicians, archivists and hobbyists who need to read legacy or current drives without opening a computer case. The adapter also supports DVD-ROM, CD-RW and DVD-RW units for media recovery tasks. Compatibility spans Windows 10 through XP, Mac OS, Linux and Chrome OS.

Plug-and-play with included 12 V supply

No driver installation is required on supported operating systems; the device is recognised immediately after connection. A 12 V DC power adapter is supplied for 3.5in drives, while 2.5in units can often run on bus power alone. An on/off switch lets you cut power before swapping drives, reducing the risk of connector damage. The only common issue is forgetting to attach the external supply when a 3.5in drive fails to spin up.

Sustained transfers at USB 3.0 speeds

The link operates at up to 5 Gb/s and remains backward compatible with USB 2.0 and 1.1 hosts. During long imaging or cloning sessions the throughput stays consistent because the bridge chip does not throttle under thermal load. Drives up to 6 TB are supported, so full-volume copies complete without the speed drops seen on older USB 2.0 adapters. The aluminium housing helps dissipate heat during extended use.

Puncte forte

  • Connect 2.5 or 3.5 inch SATA and IDE drives via USB 3.0
  • Transfer data at up to 5Gb/s, 10 times faster than USB 2.0
  • Works with Windows, Mac OS, Linux and Chrome OS
  • Includes 12V DC power supply for 3.5 inch drives
  • On/Off switch protects connected hard drives

Specificații

BrandWRIARICH
ModelE19
ColorBlack
Changer TypeUSB to IDE&SATA
SpecificationsAll in One Solution to Connect to Different Types of Interface's Hard Drive
This USB 3.0 to SATA IDE Adapter connects any standard 2.5in or 3.5in SATA or IDE hard drive to a computer through an available USB 3.0 port, also supported DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW; Backward compatible with USB 2.0/1.1.
Supported Drives: 2.5"/3.5" SATA HDD/SSD; 2.5"/3.5" IDE HDD; DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW.
Compatible with Windows 10/8/8.1/7/Vista/XP and Mac OS, Linux, and Chrome OS etc.
Data Transfer Rate: up to 5Gb/s (10 times faster than USB 2.0).
Support
Package ContentsAll in One Solution to Connect to Different Types of Interface's Hard Drive
This USB 3.0 to SATA IDE Adapter connects any standard 2.5in or 3.5in SATA or IDE hard drive to a computer through an available USB 3.0 port, also supported DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW; Backward compatible with USB 2.0/1.1.
No Drive Needed for Windows, Mac and Linux, Chrome
the included external power adapter will allow you to power your drives outside without opening your case. the plug and play function with no driving need, features works wonder with Windows and OSX saving your time and tro

Întrebări despre acest articol

How can I confirm the E19 adapter is working correctly after connecting a 3.5 inch SATA drive?

Connect the included 12V DC power supply, flip the On/Off switch, and the drive should appear in your OS file manager; the USB 3.0 link supports up to 5Gb/s transfer rates.

What cables and accessories are included in the E19 package, and what must I provide myself?

The box contains the USB 3.0 to SATA/IDE adapter, a 12V DC power adapter for 3.5 inch drives, and necessary data cables; you only need to supply the host computer with a USB 3.0 or 2.0 port.

Which drive types and maximum capacity does the E19 support so I can pick the right one?

It handles 2.5 and 3.5 inch SATA HDDs or SSDs, 2.5 and 3.5 inch IDE HDDs, plus optical drives up to 6TB capacity.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.