XPG
XPG GAMMIX S11 Pro 2TB internal SSD with heatsink
- Internal Solid Stat…
- Consumer
227,99 USD
0.00287163BTC
În stoc
XPG
XPG GAMMIX S11 Pro 1TB internal SSD with heatsink
A 1 TB internal SSD with a heatsink delivering up to 3500 MB/s read and 3000 MB/s write over PCIe 3.0 x4 NVMe 1.3
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity1TB
- Memory Components3D NAND
- InterfacePCI-Express 3.0 x4, NVMe 1.3
Options 1TB S11 Pro
- 2TB S11 Pro
- 1TB S11 Pro
- Delivers sequential read speeds up to 3500 MB/s via PCIe 3.0 x4 NVMe 1.3 interface
- Sustains sequential write speeds up to 3000 MB/s for fast game installs and large file transfers
- Achieves 4KB random read up to 390000 IOPS and random write up to 380000 IOPS for responsive multitasking
- Rated 640 TBW with 2000000 hours MTBF using 3D NAND for long-term endurance
- Integrated heatsink lowers drive temperature by up to 10°C for stable performance under load
GAMMIX S11 Pro 1TB NVMe SSD with heatsink
This internal solid-state drive uses a PCIe 3.0 x4 interface and NVMe 1.3 to reach sequential reads of 3500 MB/s and writes of 3000 MB/s. It is built for gamers, overclockers and rendering professionals who need sustained speed. The integrated heatsink lowers drive temperature by up to 10 °C.
PCIe 3.0 x4 interface limits real-world throughput
The bus caps sequential bandwidth near 3500 MB/s read and 3000 MB/s write, so heavier workloads cannot exceed that ceiling. Random performance tops out at 390000 IOPS read and 380000 IOPS write. Endurance is rated at 640 TBW with a 2000000-hour MTBF.
Check M.2 2280 slot and heatsink clearance
Verify the motherboard has an M.2 2280 key-M slot wired for PCIe 3.0 x4 and NVMe 1.3. Ensure the heatsink fits under any motherboard shield or graphics card backplate. Confirm the BIOS can boot from an NVMe drive before installing.
Puncte forte
- Delivers sequential read speeds up to 3500 MB/s via PCIe 3.0 x4 NVMe 1.3 interface
- Sustains sequential write speeds up to 3000 MB/s for fast game installs and large file transfers
- Achieves 4KB random read up to 390000 IOPS and random write up to 380000 IOPS for responsive multitasking
- Rated 640 TBW with 2000000 hours MTBF using 3D NAND for long-term endurance
- Integrated heatsink lowers drive temperature by up to 10°C for stable performance under load
Specificații
| Brand | XPG |
|---|---|
| Series | GAMMIX S11 Pro |
| Model | AGAMMIXS11P-1TT-C |
| Part Number | AGAMMIXS11P-1TT-C |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 3.0 x4, NVMe 1.3 |
| Controller | SMI SM2262EN |
| Max Sequential Read | Up to 3500 MBps |
| Max Sequential Write | Up to 3000 MBps |
| 4KB Random Read | Up to 390,000 IOPS |
| 4KB Random Write | Up to 380,000 IOPS |
| Terabytes Written (TBW) | 640TB |
| MTBF | 2,000,000 hours |
| HeatSink | with HeatSink |
| Power Consumption (Idle) | 0.14W |
| Power Consumption (Active) | 0.33W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1500G |
| Height | 6.10mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 11.00g |
Alte versiuni ale acestui model
1 în plus din aceeași gamă
Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.
Întrebări despre acest articol
Should I pick the 1TB GAMMIX S11 Pro or a smaller capacity?
The 1TB model delivers up to 3500 MB/s sequential read and 3000 MB/s write with 640 TBW endurance, so it suits heavy gaming and rendering workloads better than lower-capacity variants.
What do the 3500/3000 MB/s figures mean once the drive is installed in my PC?
Those are peak sequential speeds over the PCIe 3.0 x4 link; real-world throughput depends on your motherboard's M.2 slot wiring, thermal headroom and the workload mix you run.
Does the PCIe 3.0 x4 NVMe 1.3 interface cap performance in practice?
The four-lane Gen 3 ceiling sits near 3500 MB/s read, so this drive already saturates the bus; a PCIe 4.0 platform would not raise its sequential numbers further.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
