Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
A 2.5 inch enclosure with M.2 NVMe slot and U.2 connector

ZTC

ZTC Sky Adapter M.2 NVMe to U.2 2.5" Enclosure

SKU CH-7N3C-5AS0S

Converts an M.2 NVMe SSD into a 2.5" U.2 drive with 3800MB/s read speeds

  • Size2.5"
  • Standard 2.5" form factor fits 9.5 mm drive bays
  • Converts M.2 NVMe SSD to U.2 SFF-8639 interface
  • Read speeds up to 3800 MB/s for fast data access
  • Built-in M-key receptacle plus CLKREQ# support
  • circuit and thermal shutdown protection with in-rush current suppression

ZTC Sky Adapter M.2 NVMe to U.2

This enclosure converts an M.2 PCIe NVMe SSD into a standard 2.5" U.2 form factor. It uses a built-in SFF-8639 plug connector and an M.2 M-key receptacle to bridge the interfaces. The unit draws 3.3V power with a 4A maximum output current. Read speeds up to 3800MB/s are supported through the PCIe link.

Suits builders adding NVMe storage to U.2 bays

Users with spare 2.5" U.2 drive slots can populate them with readily available M.2 NVMe modules. The adapter includes short-circuit and thermal shutdown protection plus in-rush current suppression. It is not for users who need to connect drives using other interfaces or form factors. Systems without a U.2 backplane or cable cannot use this enclosure.

3800MB/s read speed ceiling

The single specification that determines fit is the maximum sequential read throughput of 3800MB/s. This ceiling comes from the PCIe lane configuration supported by the M.2 receptacle and SFF-8639 connector. If your workload demands higher sustained bandwidth, this adapter will bottleneck the SSD. Match the enclosure to drives and host controllers that operate within this limit.

Puncte forte

  • Standard 2.5" form factor fits 9.5 mm drive bays
  • Converts M.2 NVMe SSD to U.2 SFF-8639 interface
  • Read speeds up to 3800 MB/s for fast data access
  • Built-in M-key receptacle plus CLKREQ# support
  • circuit and thermal shutdown protection with in-rush current suppression

Specificații

Size2.5"

Întrebări despre acest articol

What M.2 NVMe SSD keying and connector does the enclosure accept?

The enclosure uses a built-in M.2 (NGFF) M-key receptacle connector for the SSD.

Which host-side interface must my system provide for this adapter to function?

Your system needs a U.2 (SFF-8639) port to connect the adapter's plug connector.

How do I confirm the adapter is running at full PCIe 4-lane speed after installation?

LED2 ON indicates the M.2/PCIe 4 lanes device Power OK status.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.