Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
A 2.5 inch enclosure with M.2 NVMe slot and U.2 connector

ZTC

ZTC Sky Adapter M.2 NVMe to U.2 2.5" Enclosure

SKU CH-7N3C-5AS0S

Converts an M.2 NVMe SSD into a 2.5" U.2 drive with 3800MB/s read speeds

  • Size2.5"
  • Standard 2.5" form factor fits 9.5 mm drive bays
  • Converts M.2 NVMe SSD to U.2 SFF-8639 interface
  • Read speeds up to 3800 MB/s for fast data access
  • Built-in M-key receptacle plus CLKREQ# support
  • circuit and thermal shutdown protection with in-rush current suppression

ZTC Sky Adapter M.2 NVMe to U.2

This enclosure converts an M.2 PCIe NVMe SSD into a standard 2.5" U.2 form factor. It uses a built-in SFF-8639 plug connector and an M.2 M-key receptacle to bridge the interfaces. The unit draws 3.3V power with a 4A maximum output current. Read speeds up to 3800MB/s are supported through the PCIe link.

Suits builders adding NVMe storage to U.2 bays

Users with spare 2.5" U.2 drive slots can populate them with readily available M.2 NVMe modules. The adapter includes short-circuit and thermal shutdown protection plus in-rush current suppression. It is not for users who need to connect drives using other interfaces or form factors. Systems without a U.2 backplane or cable cannot use this enclosure.

3800MB/s read speed ceiling

The single specification that determines fit is the maximum sequential read throughput of 3800MB/s. This ceiling comes from the PCIe lane configuration supported by the M.2 receptacle and SFF-8639 connector. If your workload demands higher sustained bandwidth, this adapter will bottleneck the SSD. Match the enclosure to drives and host controllers that operate within this limit.

Přednosti

  • Standard 2.5" form factor fits 9.5 mm drive bays
  • Converts M.2 NVMe SSD to U.2 SFF-8639 interface
  • Read speeds up to 3800 MB/s for fast data access
  • Built-in M-key receptacle plus CLKREQ# support
  • circuit and thermal shutdown protection with in-rush current suppression

Specifikace

Size2.5"

Otázky k tomuto produktu

What M.2 NVMe SSD keying and connector does the enclosure accept?

The enclosure uses a built-in M.2 (NGFF) M-key receptacle connector for the SSD.

Which host-side interface must my system provide for this adapter to function?

Your system needs a U.2 (SFF-8639) port to connect the adapter's plug connector.

How do I confirm the adapter is running at full PCIe 4-lane speed after installation?

LED2 ON indicates the M.2/PCIe 4 lanes device Power OK status.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.