Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black 120mm square case fan, 38mm thick, three-pin connector

Zyvpee

Zyvpee 4114N/2XH 120mm 38mm 24V 11W 3 Pin Case Fan

SKU CH-SNC7-ZNS0X

A 120 mm case fan with 38 mm thickness, dual ball bearings, and over 80 CFM airflow at 24 V

  • TypeCase Fan
  • CompatibilityCase
  • Bearing Type2 Ball
  • Air Flow>80 CFM
  • Power Connector3 Pin
  • ColorBlack
  • High airflow over 80 CFM cools cases effectively
  • Dual ball bearing ensures long operational life
  • 11 W at 24 V keeps power draw low
  • 38 mm thick frame fits standard 120 mm mounts
  • Three-pin connector enables simple motherboard control

120 mm 24 V case fan for server cooling

The Zyvpee 4114N/2XH is a 120 mm square fan built for 24 V DC systems. It moves more than 80 CFM through a 38 mm thick frame using a dual-ball bearing. The unit draws 458 mA at 11 W and terminates in a three-pin connector.

Check voltage header and mounting depth

Verify that your chassis or controller supplies a 24 V DC header; a standard 12 V motherboard header will not run this fan. Confirm the 38 mm thickness clears nearby cables, drive cages or radiator brackets. Ensure the three-pin plug matches the pin-out of your fan header or adapter.

Three-pin tachometer enables speed monitoring

The third wire carries a tachometer signal so the host can report real-time RPM. No PWM wire is present, so speed control depends on voltage regulation from the controller. Black non-LED blades keep the assembly visually neutral in rack or workstation builds.

Puncte forte

  • High airflow over 80 CFM cools cases effectively
  • Dual ball bearing ensures long operational life
  • 11 W at 24 V keeps power draw low
  • 38 mm thick frame fits standard 120 mm mounts
  • Three-pin connector enables simple motherboard control

Specificații

Series4114N/2XH
Model4114N/2XH
TypeCase Fan
CompatibilityCase
Bearing Type2 Ball
Air Flow>80 CFM
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions120mm*120mm*38mm

Întrebări despre acest articol

Does the Zyvpee 4114N/2XH include mounting screws or do I need to supply them?

The fan ships as the bare 120 mm unit with a 3-pin lead; mounting hardware is not included and must be sourced separately.

Is the 11 W, 24 V version the only option in the 4114N series?

The listing specifies the single 24 V, 458 mA, 11 W model with 2-ball bearings; no other voltage or power variants are offered.

What does the >80 CFM airflow figure deliver inside a typical chassis?

At 24 V the fan moves over 80 CFM through its 38 mm frame, providing strong directed cooling for inverter or component zones.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.