Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare

Zyvpee

Zyvpee DFB301005L 30mm case fan

SKU CH-CHKF-4K72Y

A 30 mm ball-bearing case fan drawing 0.5 W at 5 V for compact cooling

  • TypeCase Fan
  • Fan Size30mm
  • Bearing TypeBall
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • Compact 30 mm frame fits tight chassis spaces
  • Ball bearing ensures durable, low-friction operation
  • 5 V, 0.5 W draw keeps power use minimal
  • Two-pin connector simplifies wiring in small devices
  • Non-LED black design stays discreet in any build

30 mm ball-bearing case fan

The Zyvpee DFB301005L is a 30 mm square case fan with a ball bearing and a two-pin power connector. It runs on a 5 V supply and draws 0.5 W. The compact frame measures 30 mm by 10 mm and has no LED lighting. It is suited for tight spaces such as small-form-factor chassis or network equipment.

Two-pin 5 V power limit

The fan uses a simple two-pin connector that delivers fixed 5 V power without PWM speed control. Speed cannot be adjusted by the motherboard and the fan will run at full voltage whenever powered. The 0.5 W draw is low but the connector provides no tachometer signal for monitoring. Builders needing variable speed or fan-speed reporting must use a different interface.

Check voltage header and mounting holes

Verify that your board or device offers a 5 V two-pin header with the correct pin spacing for this fan. The 30 mm by 10 mm frame requires matching mounting holes or a compatible bracket. Confirm the physical clearance in your chassis or router enclosure before ordering. No screws or adapters are mentioned in the specifications.

Puncte forte

  • Compact 30 mm frame fits tight chassis spaces
  • Ball bearing ensures durable, low-friction operation
  • 5 V, 0.5 W draw keeps power use minimal
  • Two-pin connector simplifies wiring in small devices
  • Non-LED black design stays discreet in any build

Specificații

BrandZyvpee
SeriesDFB301005L
ModelDFB301005L
TypeCase Fan
Fan Size30mm
Bearing TypeBall
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesMIni Cooling
Dimensions30*10mm

Întrebări despre acest articol

Should I pick the 30mm or 3010 version of this fan?

There is only one version listed: the DFB301005L measures 30mm by 10mm and runs on 5V at 0.5W with a 2-pin connector.

What does the 0.5W rating mean once the fan is installed?

It draws half a watt at 5 volts, so a standard 5V header or USB port can power it without extra adapters.

What does the 2-pin connector limit in practice?

The 2-pin design supplies fixed 5V power only; speed control or monitoring requires a separate controller or voltage regulator.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.