Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się

Zyvpee

Zyvpee DFB301005L 30mm case fan

SKU CH-CHKF-4K72Y

A 30 mm ball-bearing case fan drawing 0.5 W at 5 V for compact cooling

  • TypeCase Fan
  • Fan Size30mm
  • Bearing TypeBall
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • Compact 30 mm frame fits tight chassis spaces
  • Ball bearing ensures durable, low-friction operation
  • 5 V, 0.5 W draw keeps power use minimal
  • Two-pin connector simplifies wiring in small devices
  • Non-LED black design stays discreet in any build

30 mm ball-bearing case fan

The Zyvpee DFB301005L is a 30 mm square case fan with a ball bearing and a two-pin power connector. It runs on a 5 V supply and draws 0.5 W. The compact frame measures 30 mm by 10 mm and has no LED lighting. It is suited for tight spaces such as small-form-factor chassis or network equipment.

Two-pin 5 V power limit

The fan uses a simple two-pin connector that delivers fixed 5 V power without PWM speed control. Speed cannot be adjusted by the motherboard and the fan will run at full voltage whenever powered. The 0.5 W draw is low but the connector provides no tachometer signal for monitoring. Builders needing variable speed or fan-speed reporting must use a different interface.

Check voltage header and mounting holes

Verify that your board or device offers a 5 V two-pin header with the correct pin spacing for this fan. The 30 mm by 10 mm frame requires matching mounting holes or a compatible bracket. Confirm the physical clearance in your chassis or router enclosure before ordering. No screws or adapters are mentioned in the specifications.

Najważniejsze cechy

  • Compact 30 mm frame fits tight chassis spaces
  • Ball bearing ensures durable, low-friction operation
  • 5 V, 0.5 W draw keeps power use minimal
  • Two-pin connector simplifies wiring in small devices
  • Non-LED black design stays discreet in any build

Specyfikacja

BrandZyvpee
SeriesDFB301005L
ModelDFB301005L
TypeCase Fan
Fan Size30mm
Bearing TypeBall
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesMIni Cooling
Dimensions30*10mm

Pytania dotyczące tego produktu

Should I pick the 30mm or 3010 version of this fan?

There is only one version listed: the DFB301005L measures 30mm by 10mm and runs on 5V at 0.5W with a 2-pin connector.

What does the 0.5W rating mean once the fan is installed?

It draws half a watt at 5 volts, so a standard 5V header or USB port can power it without extra adapters.

What does the 2-pin connector limit in practice?

The 2-pin design supplies fixed 5V power only; speed control or monitoring requires a separate controller or voltage regulator.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.